Atec EXFO-FTB-8510B - Manual (Page 6)

FTB-8510B Packet Blazer
ETHERNET INTERFACES
Note
a. Available as a software option.
OPTICAL INTERFACES
Optical interfaces Two ports at 100M and GigE
Available wavelengths (nm) 850, 1310 and 1550
100Base-FX 100Base-LX 1000Base-SX 1000Base-LX 1000Base-ZX
Wavelength (nm) 1310 1310 850 1310 1550
Tx level (dBm) —20 to —15 —15 to —8 —9 to —3 —9.5 to —3 0 to 5
Rx level sensitivity (dBm) —31 —28 —20 —22 —22
Maximum reach 2 km 15 km 550 m 10 km 80 km
Transmission bit rate (Gbit/s) 0.125 0.125 1.25 1.25 1.25
Reception bit rate (Gbit/s) 0.125 0.125 1.25 1.25 1.25
Tx operational wavelength range (nm) 1280 to 1380 1261 to 1360 830 to 860 1270 to 1360 1540 to 1570
Measurement accuracy (uncertainty)
Frequency (ppm)
Optical power (dB) ±4.6
±2 ±4.6
±2 ±4.6
±2 ±4.6
±2 ±4.6
±2
Maximum Rx before damage (dBm) 3 3 6 6 6
Jitter compliance ANSI X3.166 IEEE 802.3 IEEE 802.3 IEEE 802.3 −
Ethernet classification ANSI X3.166 IEEE 802.3 IEEE 802.3 IEEE 802.3 −
Laser type LED FP VCSEL FP DFB
Eye safety Class 1 Class 1 Class 1 Class 1 Class 1
Connector LC LC LC LC LC
Transceiver type SFP SFP SFP SFP SFP
ELECTRICAL INTERFACES
Electrical interfaces
Two ports 10/100BaseT half/full duplex, 1000BaseT a full duplex.
Straight/crossover cable selection.
10Base-T 100Base-T 1000Base-T
Tx bit rate 10 Mbit/s 125 Mbit/s 1 Gbit/s
Tx accuracy (uncertainty) (ppm) ±100 ±100 ±100
Rx bit rate 10 Mbit/s 125 Mbit/s 1 Gbit/s
Rx measurement accuracy (uncertainty) (ppm) ±4.6 ±4.6 ±4.6
Duplex mode Half and full duplex Half and full duplex Full duplex
Jitter compliance IEEE 802.3 IEEE 802.3 IEEE 802.3
Connector RJ-45 RJ-45 RJ-45
Maximum reach (m) 100 100 100