Ftb-8510b packet blazer, Ordering information, Ftb-85 xx - xx – Atec EXFO-FTB-8510B User Manual
Page 10
EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EXFO has made every effort to ensure that the information contained in
this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of
measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit
www.EXFO.com/recycle.
Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at
www.EXFO.com/specs
.
In case of discrepancy, the Web version takes precedence over any printed literature.
EXFO Headquarters
>
Tel.: +1 418 683-0211 | Toll-free: +1 800 663-3936 (USA and Canada) | Fax: +1 418 683-2170 | [email protected] |
www.EXFO.com
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to
www.EXFO.com/contact
.
FTB-8510B Packet Blazer
SPFTB8510B.15AN
© 2013 EXFO Inc. All rights reserved.
2008
Printed in Canada 13/06
ORDERING INFORMATION
Model
FTB-85
10B
a
FTB-85
10B-1
b
FTB-85
10B-2
c
Other options
00
= Without other options
100 optical
= 100 Mbit/s optical capability on both ports
TCP
= TCP throughput measurement
IPTV_MON
= IPTV testing and analysis (10 streams)
IPTV_MaxStream
= IPTV testing and analysis (100 streams)
802.3ah OAM
= 802.3ah OAM testing
PBB-TE
= PBB-TE testing
MPLS
= MPLS testing
FC
= 1x and 2X Fibre Channel option
Adv_filtering
= Advanced filtering capabilities
IPv6
= IPv6 testing capabilities
ETH-THRU
= Through mode testing
d
EtherSAM
= EtherSAM (ITU-T Y.1564) testing capabilities
Data_Capture
= Data capture and decode capabilities
TRAFFIC-SCAN
= VLAN/MPLS traffic scan
Example: FTB-8510B-2-100 optical
MODULE
TRANSCEIVER
FTB-8590
=
SFP mutirate optical transceiver module: Rates: GigE/FC/2FC
850 nm, LC, MMF, < 500 m reach
FTB-8591
= SFP mutirate optical transceiver module: Rates: GigE/FC/2FC
1310 nm, LC, 10 km reach
FTB-8592
=
SFP mutirate optical transceiver module: Rates: GigE/FC/2FC
1550 nm, LC, 90 km reach
FTB-85910
=
100Base-FX (1310 nm) MM, LC connectors; optical SFP transceiver
module for FTB-8510B Packet Blazer
e
FTB-85911
=
100Base-LX (1310 nm) SM, LC connectors; optical SFP transceiver
module for FTB-8510B Packet Blazer
e
Notes
a. Provides 2x 10/100 BaseT ports.
b. Provides 2x 10/100 BaseT ports and 1x GigE port.
c. Provides 2x 10/100 BaseT ports and 2x GigE ports.
d. Requires FTB-8510-2 configuration.
e. Available with 100 optical option.
FTB-85
XX
-
XX