Electric and magnetic field measurement, Specifications, Efa-300 field analyzer – Atec Narda-EFA300 User Manual
Page 4
32
narda
Safety Test Solutions an
communications company USA • Germany • Italy
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: [email protected] • www.narda-sts.us
Electric and Magnetic Field Measurement
Specifications
magnetiC (b-) fielD
eleCtriC (e-) fielD
100 cm² Probe
internal Probe
3 cm Probe
Sensor System
Coil (internal or external)
Plate Electrode
Measurement Axis, selectable
Tri-Axial (Isotropic) or Single Axis
FIELD STRENGTH MODE
Frequency
Range
Broadband (+0/-3 dB),
selectable
5 Hz to 2 kHz, 30 Hz to 2 kHz, 5 Hz to 32 kHz or 30 Hz to 32 kHz
Band Pass / Band Reject
Filter, adjustable
15 Hz to 2 kHz (resolution 0.1 Hz)
Detection, selectable
RMS (averaging time 1 sec.)
Peak Value (proper phase)
Measurement
Range
Nominal
100 nT to 32 mT
100 nT to 32 mT
100 nT to 32 mT
10 V/m to 100 kV/m
Damage Level
(Peak)
Damage Level (Peak)
91 mT
a
@ ≤125 Hz
91 mT
a
@ ≤625 Hz
91 mT
a
@ ≤625 Hz
280 kV/m
Damage Level (Peak)
a
For magnetic field
probes depending on
frequency
Noise Level
(RSM), typical
Broadband,
30 Hz to 2 kHz
4 nT
100 nT
20 nT
0.7 V/m
Broadband,
5 Hz to 32 kHz
10 nT
200 nT
50 nT
4.5 V/m
Band Pass Filter,
50 Hz to 400 Hz
0.8 nT
25 nT
5 nT
0.14 V/m
Uncertainty,
typical
b
Broadband,
5 Hz to 2 kHz
±3% @ ≥40 nT
±5% @ ≥1µT
±4% @ ≥200 nT
±3% @ ≥5 V/m
Broadband,
5 Hz to 32 kHz
±3% @ ≥80 nT
±8% @ ≥2 µT
±5% @ ≥400 nT
±3% @ ≥40 V/m
Band Pass Filter, 50 Hz
to 400 Hz
±3% @ ≥10 nT
±5% @ ≥250 nT
±4% @ ≥50 nT
±3% @ ≥1 V/m
a The upper limit decreases linearly with increasing frequency above the mentioned frequency.
Overload limit for 100 cm² Probe =
Overload limit for 3 cm and internal Probe 100 cm² Probe =
b Uncertainty includes all partial uncertainties (absolute, linearity, frequency response, and isotropy) as well as temperature and humidity related deviations.
Signal sinusoidal, level >10% of selected measurement range; additional uncertainties apply with the steep frequency band limits.
efa-300 field analyzer
8000 mT • Hz
Frequency
( ) •
√ 2
40000 mT • Hz
Frequency
( ) •
√ 2