Atec Agilent-N9340B - Manual (Page 9)

09
Specifications
Handheld Spectrum Analyzer (HSA)
N9340B
Specifications apply under the following conditions:
After a warm-up time of 30 minutes, and at least two hours of operation or storage at operating temperature
Within a valid calibration period
Data with no given tolerances are typical values only. Data designated as 'typical' is not covered by the product warranty.
Supplemental information
Frequency
Frequency
Frequency range : 100 kHz to 3 GHz (tunable to 9 kHz)
Internal 10 MHz frequency reference accuracy
Aging rate :
Temperature stability :
± 1 ppm / year
± 2 ppm
AC coupled
Frequency readout accuracy with marker (Start, stop, center, marker)
Marker resolution :
Uncertainty :
( frequency span ) / ( number of sweep points – 1)
± ( frequency indication × frequency reference uncertainty
+1% × span + 20% × resolution bandwidth + marker
resolution+1 Hz)
Marker frequency counter
Frequency reference uncertainty = (aging rate x period of time since adjustment + temperature stability )
Frequency reference error = (aging rate x period of time since adjustment + temperature stability )
Resolution:
Accuracy:
1 Hz
1 Hz
± (marker frequency × frequency reference
± span / ( sweep points – 1)
uncertainty + Counter resolution)
RBW/ span 0.02; marker level to displayed
noise level >
>
25 dB; frequency offset 0 Hz
Frequency span
Range :
Resolution :
Accuracy :
0 Hz (zero span), 1 kHz to 3 GHz
SSB phase noise
Carrier offset :
30 kHz
100 kHz
1 MHz
< – 87 dBc (1 Hz)
< – 100 dBc (1 Hz)
< – 120 dBc (1 Hz)
fc = 1 GHz; RBW 100 Hz; VBW 10 Hz; RMS detector
Resolution bandwidth (RBW)
– 3 dB bandwidth :
– 3 dB bandwidth :
Accuracy :
Accuracy :
Resolution filter shape factor :
30 Hz to 1 MHz
± 5%
± 5%
< 5 : 1
1- 3 - 10 sequence
1- 3 - 10 sequence
Nominal
Nominal
60 dB / 3 dB bandwidth ratio;Nominal;
Digital, approximately Gaussian shape
Video bandwidth (VBW)
3 Hz to 1 MHz
0 °C to 30 °C
20 °C to 30 °C; Typical
in addition +2 ppm / 10 °C 30 °C to 50 °C