Atec Agilent-E4443A-45A-40A-47A-46A-48A - Manual (Page 7)

7
Amplitude Specifi cations
Amplitude range
Measurement range Displayed average noise level (DANL) to maximum safe input level
Input attenuator range (3 Hz to 50 GHz) 0 to 70 dB in 2 dB steps
Maximum safe input level
Average total power +30 dBm (1 W)
Preamp (Option E444xA-1DS) +30 dBm
Preamp (Option E444xA-110) +23 dBm
Peak pulse power < 10 µs pulse width, < 1% duty cycle and input attenuation ≥ 30 dB +50 dBm (100 W)
DC volts DC coupled < ±0.2 Vdc AC coupled (E4443A, E4445A, E4440A only) ±100 Vdc
1 dB gain compression (two-tone)
Total power at input mixer
20 MHz to 200 MHz 0 dBm +3 dBm nominal
200 MHz to 3 GHz +3 dBm +7 dBm nominal
3 GHz to 6.6 GHz +3 dBm +4 dBm nominal
6.6 GHz to 26.5 GHz –2 dBm 0 dBm nominal
26.5 GHz to 50 GHz 0 dBm nominal
Preamp on (Option E444xA-1DS) 10 MHz to 200 MHz –30 dBm nominal
200 MHz to 3 GHz –25 dBm nominal
Preamp on (Option E444xA-110) 10 MHz to 200 MHz –24 dBm nominal
200 MHz to 3 GHz –20 dBm nominal
3.0 GHz to 6.6 GHz –23 dBm nominal
6.6 GHz to 30 GHz –27 dBm nominal
30 GHz to 50 GHz –24 dBm nominal
Typical gain compression (two-tone)
Mixer level Compression
20 MHz to 200 MHz 0 dBm < 0.5 dB
200 MHz to 6.6 GHz +3 dBm < 0.5 dB
6.6 GHz to 26.5 GHz –2 dBm < 0.4 dB