Atec Agilent-8560EC-65EC Series - Manual (Page 9)

Inputs/Outputs, Agilent 8560 EC Series, continued
Blanking/gate
Output Shared BNC female, 50 Ω
Blanking mode
During sweep Low TTL level
During retrace High TTL level
Gate mode
Gate on High TTL level
Gate off Low TTL level
External/gate
Trigger input Shared BNC female, > 10 kΩ
Settable to high TTL or low TTL
GPIB IEEE-488 bus connector
Interface functions SH1, AH1, T6, L4, LE0, RL1, PP1, DC1, DT1, C1, C28, TE0, SR1
Direct printer output Supports HP 3630A PaintJet printer, HP 2225A ThinkJet printer
Direct plotter output Supports HP 7225A/7440A/7470A/7475A/7550A
Options
Option 856xEC-001 second IF output, Agilent 8560 EC Series
(all values are nominal)
3 dB bandwidth 8560EC 8561EC 8562EC 8563EC 8564EC, 8565EC
NF
conversion gain
30 Hz to 2.9 GHz 1 > 25 MHz > 25 MHz > 25 dB > 25 MHz > 25 MHz
24 dB 25 dB 20 dB 25 dB 28 dB
1.2 dB –6.5 dB –1.2 dB –1.2 dB –1.2 dB
2.9 GHz to 6.5 GHz > 30 MHz > 30 MHz > 30 MHz > 30 MHz
26 dB 22 dB 22 dB 23 dB
–1 dB –3 dB –1 dB –1 dB
6.5 GHz to 13.2 GHz > 37 MHz > 37 MHz > 37 MHz
26 dB 26 dB 28 dB
–5.7 dB –5.7 dB –5.7 dB
13.2 GHz to 22 GHz > 45 MHz > 45 MHz
30 dB 32 dB
–8 dB –8 dB
22 GHz to 26.8 GHz > 45 MHz > 45 MHz
32 dB 35 dB
–8 dB –8 dB
26.8 GHz to 31.15 GHz > 25 MHz
28 dB
–9 dB
31.15 GHz to 40 GHz > 25 MHz
38 dB
–19 dB
40 GHz to 50 GHz > 25 MHz
42 dB
–23 dB
Option 8560EC-002 Built-in tracking generator
2
Frequency specifications
Frequency range 300 kHz to 2.9 GHz
Accuracy
After peaking ±(frequency reference accuracy x tuned frequency + 5% x span + 295 Hz)
Tracking drift (nominal) Usable in 1 kHz RBW after 5 minutes warm-up. Usable in 300 Hz RBW after
30-minute warm-up.
Minimum RBW 300 Hz 3
9
1. DC coupled for frequencies below 100 kHz. Option 856xEC-006 required for operation below 9 kHz in Agilent 8563EC, 8564EC, 8565EC.
2. Option 8560EC-002 is no longer offered.
3. Tracking generator not usable with resolution bandwidths ≤ 100 Hz.