Atec Agilent-8560EC-65EC Series - Manual (Page 10)

Options, continued
Amplitude specifications
Output level –10 dBm to +1 dBm
10 dBm to +2.8 dBm (typical)
Resolution 0.1 dB
Accuracy
Vernier ±0.20 dB, ±0.5 dBm max (25 °C ±10 °C)
Absolute ±0.75 dB
Level flatness ±2.0 dB
Effective source match 1.92:1 (nominal)
Total absolute accuracy ±3.25 dB
Spurious output (at +1 dBm output power)
Harmonic spurious –25 dBc
Non-harmonic spurious
300 kHz to 2.0 GHz –27 dBc
2.0 GHz to 2.9 GHz –23 dBc
LO feedthrough –16 dBm (3.9 GHz to 6.8 GHz)
Residuals (RF-power-off) –78 dBm (300 kHz to 2.9 GHz
Dynamic range
TG feedthrough 1
300 kHz to 1 MHz –95 dBm
1 MHz to 2.7 GHz –115 dBm
2.7 GHz to 2.9 GHz –110 dBm
Dynamic range 2
300 kHz to 1 MHz 96 dB
1 MHz to 2.7 GHz 116 dB
2.7 GHz to 2.9 GHz 111 dB
Power sweep 10 dB range, 0.1 dB resolution
Inputs/outputs
RF output (front panel) Type-N female, 50 Ω (nominal)
Maximum safe reverse level + 30 dBm, ±30 Vdc
External ALC input (rear panel) BNC female use with negative detector
10
1. Leakage measured with maximum power into 50 Ω, with 50 Ω loads on the
TG output and RF input.
2. Difference between maximum power output and tracking generator feedthrough.