Atec Agilent-8560EC-65EC Series - Manual (Page 3)

Frequency Specifications,
continued
Sweep time
Range
Span = 0 Hz 50 µs to 6000 s
Span ±100 Hz
RBW ≥ 300 Hz 50 ms to 2000 s
RBW ≤ 100 Hz 50 ms to 100 ks
Accuracy (Span = 0 Hz)
Sweep time ≥ 30 ms ±1% (digitized trace data)
Sweep time < 30 ms ±0.1% (digitized trace data)
Sweep trigger Delayed, free run, single, line, video, external
Resolution bandwidth
Range (–3 dB) 1 Hz to 1 MHz in a 1, 3, 10 sequence and 2 MHz (3 MHz at –6 dB)
Option 856xEC-103 1 10 Hz to 1 MHz in a 1, 3, 10 sequence and 2 MHz (3 MHz at –6 dB)
Accuracy 1 Hz to 300 kHz ±10%
1 MHz ±25%
2 MHz +50%, –25%
Selectivity (–60 dB/–3 dB BW ratio)
RBW ≥ 300 Hz < 15:1
RBW ≤ 100 Hz < 5:1
Video bandwidth range 1 Hz to 3 MHz in a 1, 3, 10 sequence
Noise sidebands
(see Figure 1)
Center frequency ≤ 1 GHz
Offset Option 856xEC-103 1
100 Hz ≤ –88 dBc/Hz 2 ≤ –70 dBc/Hz 2
1 kHz ≤ –97 dBc/Hz 2 ≤ –90 dBc/Hz 2
10 kHz 6 ≤ –113 dBc/Hz 3 ≤ –113 dBc/Hz 3
30 kHz 6, 8 ≤ –113 dBc/Hz 4 ≤ –113 dBc/Hz 4
100 kHz 7 ≤ –117 dBc/Hz 5 ≤ –117 dBc/Hz 5
Residual FM
(zero span, 10 Hz RBW) < 1 Hz pk-pk x N 9 in 20 ms
< 0.25 Hz pk-pk x N 9 in 20 ms (typical)
Option 856xEC-103 < 10 Hz pk-pk x N 9 in 20 ms
3
1. Option 856xEC-103 is no longer offered.
2. Add 5.2 x ((f/1 GHz)–1) for f > 1 GHz and f ≤ 2.9 GHz
3. Add 2.5 x ((f/1 GHz)–1) for f > 1 GHz and f ≤ 2.9 GHz
4. Add 3.0 dB x ((f/1 GHz)–1) for f > 1 GHz and f ≤ 2.9 GHz
5. Add 2 dB for f > 1 GHz and f ≤ 2.9 GHz
6. RBW ≤ 1 kHz or span ≤ 745 kHz
7. RBW ≥ 3 kHz or span > 745 kHz
8. Not specified at 30 kHz offset for Agilent 8564EC and Agilent 8565EC
9. N = harmonic mixing mode number