Atec California-Instruments-2003RP - Manual (Page 4)

Contact California Instruments:
Toll-Free: 800-4AC-POWER
800-422-7693
FAX: 858-677-0940
Email: [email protected]
Web page: http://www.calinst.com
9689 Towne Centre Drive, San Diego, CA 92121-1964 (858) 677-9040 FAX : (858) 677-0940
© Copyright 2000, California Instruments Corp. Specifications subject to change without notice Printed in the USA. 2003RPDS 04/00
Remote Control Option
The 2003RP can be ordered with
an option package (-OP1) to add a
combined RS232C and IEEE-488
remote control interface. Front
panel and bus measurements are
included with this option.
Ordering Information
Models:
2003RP 2000 VA three phase,
rack-mount AC Source
Options:
-AV
Avionics version. All
specifications equal to
standard 2003RP with
the following exceptions:
• Voltage ranges:
0-115 / 0-230 V
RMS
• Frequency range:
360 - 5000 Hz
• RMS Current:
2.9 / 5.8 A
RMS
• Weight:
73 lbs. / 33 Kg
-L22 Locking knobs
-OP1 Option package 1:
• Measurements
• IEEE-488 / RS232C
Interface and GUI
software
• Remote Inhibit input
• Function Strobe
output
-RMS Rack Mount Slides
Supplied with:
• Instruction / Programming
Manual
• Windows™ Graphical User
Interface (with -OP1 option)
• RS232C Serial Cable (with -
OP1 option)
Lower Power Models
For applications requiring up to
2000 VA of single phase output
power, models 801RP, 1251RP and
2001RP offer single phase outputs.
The 801RP and 1251RP models
are housed in a 3.5 inch high
rackmount enclosure. The 2001RP
uses the same chassis as the
2003RP. Refer to the 801RP/
1251RP and 2001RP data sheets
for details.
Portable AC Sources
For mobile or bench top applica-
tions, 1000 VA and 1250 VA por-
table AC power sources are avail-
able as well. The 1001P and 1251P
offer programmable AC power from
16 Hz to 500 Hz at 1000 VA and
1250 VA respectively. For applica-
tions that only require fixed voltage
and frequency settings, the
1001WP frequency converter pro-
vides push button selection of nomi-
nal 50 or 60 Hz and 100V, 115V,
220V, 230V and 240V settings.
Refer to the P and WP Series data
sheet respectively for details.
Customer Support
For technical support and ser-
vice, or to discuss your AC power
application needs, contact Califor-
nia Instruments Corp. or your local
representative.
CE Mark
The 2003RP has been fully
tested for compliance with all ap-
plicable CE Mark requirements.
2003RP Dimension drawing