Atec Agilent-N5264A - Manual (Page 7)

Typical Cycle Time
1, 2
(ms) for Measurement Completion (Cont.)
Description Typical Performance
(time/point in millisecond)
Number of Points
801 1601
Trigger Mode Hardware Sensitivity(dBm) 2
Start 2 GHz, Stop 18 GHz, 10 kHz IF bandwidth (with band crossings)
RF = MXG, N5183A opt. UNZ, Fast switching
LO = MXG, N5183A opt. UNZ, Fast switching
0.730 0.730 -110.5 dBm, 2 – 3 GHz
- 114.5 dBm, 3 –12.5 GHz
- 103 dBm, 12.5 – 18 GHz
RF = MXG, N5183A opt. UNZ, Fast switching
LO = N5264A opt. 108 3
0.730 0.730 -103.5 dBm, 2 – 3 GHz
- 110.5 dBm, 3 –12.5 GHz
- 101 dBm, 12.5 –18 GHz
RF = MXG, N5183A opt. UNZ, Fast switching
LO = PSG E8267D opt. 520, UNX
9.50 9.50 -110.25 dBm, 2 – 3 GHz
- 112.50 dBm, 3 –12.5 GHz
- 96.50 dBm, 12.5 – 18 GHz
RF = MXG, N5183A opt. UNZ, Fast switching
LO = 83623B
7.80 -- -108.5 dBm, 2 – 3 GHz
- 113.0 dBm, 3 –12.5 GHz
- 96.0 dBm, 12.5 –18 GHz
Start 2 GHz, Stop 18 GHz, 1 kHz IF bandwidth (with band crossings)
RF = MXG, N5183A opt. UNZ, Fast switching
LO = MXG, N5183A opt. UNZ, Fast switching
1.5 1.5 -120.5 dBm, 2 – 3 GHz
- 124.5 dBm, 3 –12.5 GHz
- 113 dBm, 12.5 – 18 GHz
RF = MXG, N5183A opt. UNZ, Fast switching
LO = N5264A opt. 108
3
1.5 1.5 -113.5 dBm, 2 – 3 GHz
- 120.5 dBm, 3 –12.5 GHz
- 111 dBm, 12.5 – 18 GHz
Option 118 Fast-CW mode (CW frequency)
Number of Points
per Second (#pt/Sec) External Trigger
C.W, 7.0 GHz, ≥1 MHz IF bandwidth
-- 400,000
C.W, 7.0 GHz, 600 KHz IF bandwidth
Up to 400,000 240,000
C.W, 7.0 GHz, 10 KHz IF bandwidth
Up to 8,200 7,000
C.W, 7.0 GHz, 1 KHz IF bandwidth
Up to 1,000 1,000