Atec Espec-SH-641 - Manual (Page 8)

7
SH
Model SH−221 SH−241 SH−261 SH−641 SH−661
System Balanced Temperature & Humidity Control system (BTHC system)
T
e
m
p
. p
e
rf
o
rm
a
n
c
e
*1
Temp. range
−20 to ＋150℃
(−4 to ＋302℉)
−40 to ＋150℃
(−40 to ＋302℉)
−60 to ＋150℃
(−76 to ＋302℉)
−40 to ＋150℃
(−40 to ＋302℉)
−60 to ＋150℃
(−76 to ＋302℉)
Temp. fl uctuation
±0.3℃ (−20 to ＋100℃)
±0.5℃ (＋100.1 to ＋150℃) ±0.3℃ (−40 to ＋100℃)
±0.5℃ (＋100.1 to ＋150℃) ±0.3℃ (−60 to ＋100℃)
±0.5℃ (＋100.1 to ＋150℃) ±0.3℃ (−40 to ＋100℃)
±0.5℃ (＋100.1 to ＋150℃) ±0.3℃ (−60 to ＋100℃)
±0.5℃ (＋100.1 to ＋150℃)
Temp. gradient /
Temp. variation in space 2.5℃ (−20 to ＋100℃)
4.0℃ (＋100.1 to ＋150℃) 2.5℃ (−40 to ＋100℃)
4.0℃ (＋100.1 to ＋150℃) 2.5℃ (−60 to ＋100℃)
4.0℃ (＋100.1 to ＋150℃) 2.5℃ (−40 to ＋100℃)
4.0℃ (＋100.1 to ＋150℃) 2.5℃ (−60 to ＋100℃)
4.0℃ (＋100.1 to ＋150℃)
Temp.
rate of
change Heat up rate 3.2℃ /min. 3.2℃ /min. 3.2℃ /min. 2.9℃ /min. 2.9℃ /min.
Pull down rate 2.1℃ /min. 2.1℃ /min. 2.1℃ /min. 1.7℃ /min. 1.7℃ /min.
Heat up time
From −20 to ＋150℃
within 55 min.
From −40 to ＋150℃
within 60 min.
From −60 to ＋150℃
within 70 min.
From −40 to ＋150℃
within 70 min.
From −60 to ＋150℃
within 80 min.
Temp. extreme
achievement time
Pull down time
From ＋20 to −20℃
within 20 min.
From ＋20 to −40℃
within 50 min.
From ＋20 to −60℃
within 70 min.
From ＋20 to −40℃
within 60 min.
From ＋20 to −60℃
within 90 min.
Lowest attainable temp. −20℃ −40℃ −60℃ −40℃ −60℃
Hu
mi
d.
pe
rfo
rm
ance
*1
Humid. range 30 to 95％rh (Refer to diagram on page 9)
Humid. fl uctuation ±3.0％rh
Construc
tion
Heater Nichrome strip wire heater
Humidifi er Sheathed heater
Ref
ri
g
erat
io
n
un
it System Mechanical single-stage refrigeration system Mechanical cascade refrigeration system
Cooler Plate fi n cooler
Refrigerator Hermetically sealed compressor, Air-cooled condenser, Expansion mechanism: Capillary tube system
Refrigerator capacity 400W [Unit 1: 400W ×1, Unit 2: 400W ×1]
Refrigerant R404A R23, R404A
Capacity 22.5 L 64 L
Chamber total load
resistance
20 kg
Inside dimensions
mm (inch)
*2
W300×H300×D250
(W11.81×H11.81×D9.84)
W400×H400×D400
(W15.75×H15.75×D15.75)
Outside dimensions
mm (inch)
*2
W440×H630×D695
(W17.32×H24.80×D27.36)
W440×H690×D785
(W17.32×H27.18×D30.91)
W540×H730×D920
(W21.26×H28.74×D36.22)
Weight 83 kg (78 for 100V type) 105 kg 130 kg
Utilit
y
requirements
Allowable ambient conditions ＋5 to ＋35℃ (＋41 to ＋95℉）
P
o
we
r s
u
p
p
ly
*3
100V AC 1φ50/60Hz 13.5 A 15.0 A 18.0 A
115V AC 1φ60Hz 13.0 A 14.5 A —
200V AC 1φ50/60Hz — 10.5 A
220V AC 1φ50/60Hz 8.0 A 9.5 A 10.0 A
220V AC 1φ60Hz *4 8.0 A 9.5 A 10.0 A
230V AC 1φ50Hz *4 7.5 A 9.5 A 10.0 A
Noise level *5 55 dB 59 dB 61 dB
Exhaust heat quantity 3500 kJ/h (836 kcal/h) 4000 kJ/h (955 kcal/h) 5040 kJ/h (1204 kcal/h)
*1 The performance values are based on IEC 60068-3-5:2001, JTM K07:2007 for the temperature chamber, IEC 60068-3-6:2001, JTM K09:2009 for the humidity
chamber. Performance fi gures are given for a ＋23℃ ambient temperature, 65% rh, rated power supply and no specimens inside the test area. However, the lowest
attainable temperature is given for a max. ambient temperature of ＋30℃. Heat-up time is the achieved time from lowest temperature to highest temperature within
temperature range.
*2 Excluding protrusions.
*3 At ambient temperature ＋23℃. For SH-641/661, make sure to check the power capability of your installation beforehand.
*4 Compliance with CE Marking.
*5 Measurements are to be taken in an anechoic room at a height of 1.2m from the fl oor and a distance of 1m from the chamber front panel
(ISO 1996-1:2003 _ A-weighted sound pressure level)
小型環境_e_.indd 7 12.9.10 10:09:16