Atec Espec-TSE-11-A - Manual (Page 4)

Color LCD interactive
touch-screen system
Operation and settings simplified by the
use of a touch-screen LCD display
(instr uctions displayed on-screen).
At-aglance confirmation of test patterns,
test area temperatures, temperature
cycles, upstream / downstream control,
and trend graphs display.
Large 10.9-liter-capacity test area
Features a 10.9-liter test area, twice that
of our previous model. The volume that
can be processed is greatly increased,
and a 210
×
297mm printed circuit board
can be tested in the horizontal position.
Test area anti-drop mechanism
A braking system fitted to the drive
mechanism prevents specimens from
falling into the test area when the
chamber stops operation.
Other protection mechanisms are
equipped to ensure that the specimen
does not fall.
Easy wiring access
A cable port is provided on the right
side to allow easy wiring of specimens
for measurement during high and low-
temperature cycle tests.
Comprehensive safety system
A dual safety system automatically
stops the test area drive mechanism if
the door is left open, and automatically
locks the door when the test area is in
motion.
Equipped with casters for mobility
3
320mm
230mm
148mm
● Test area
Cable port (50mm, shown with cap installed)
Control panel
Setting Interactive key input by touch panel
Display TFT Color LCD
Test patterns
RAM (selected entry): a maximum of 40 patterns can be entered
ROM (built-in): contains 10 test standard patterns
Auxiliary
functions
･ Timer preset ･ Program memory
･ Test continuity selection ･ Automatic power shut-off
･ Overheat/ Overcool protection ･ Programmed time display
･ Upstream/ downstream sensor selection ･ Test suspension
･ Stable time control
･ Test completion mode selection
･ Quick exposure control ･ Trend graph
･ Power recovery mode ･ Alarm history display
･ Automatic defrost ･ Sensor calibration
･ Temperature recovery time setting ･ RS-485 communication
Controller
Characteristics