Atec EM-Test-UCS500N Series - Manual (Page 7)

DATA SHEET > UCS 500N5 > 20131118
TECHNICAL DETAILS
GENERAL DATA
INTERFACES
Serial interface USB
Parallel interface IEEE 488, addresses 1 - 30
Analog output 0 - 10VDC to control an external
transformer
CN interface 15pin SubD connector to control an
external coupling network
Fail inputs DUT monitoring via Fail1 and Fail2
input (one each)
DIMENSIONS
Dimensions 19", 3HU,
Weight approx. 25kg
MAINS
Supply voltage 115V/230VAC +10%/-15%
Power approx. 75W
Frequency 50/60Hz
Fuses 2 x T 2AT (230V) or 2 x T 4AT (115V)
SAFETY
Safety standard EN/IEC 61010
Security circuit Control input (24VDC)
Warning lamp Floating contact (max. 230V/6A)
ACCESSORIES INCLUDED
Mains supply Plug depends on the country of use
DUT supply Plug depends on the country of use
DUT adapter Socket depends on the country of
use
Operation manual,
Calibration certificate,
iec.control remote control software
OPTIONS
CNI 503Ax 3-phase coupling/decoupling
networks as per IEC 61000-4-4 and
-4-5 up to 100A per phase
iec.control 1 Remote control and documentation
software, including standard test
routines and reporting capabilities.
SPECIAL EQUIPMENT (ON REQUEST)
AVAILABLE MODELS:
UCS 500N5.1 Ultra compact simulator with EFT/N5
up to 5.5kV, VCS/N5 up to 5kV and
PFS/5; 1ph CDN 300V AC/DC (p-n) /
32A
UCS 500N5.2 Ultra compact simulator with
EFT/N5, VCS/N5 and PFS/N5; 1ph
CDN 400V AC/DC (p-n) / 16A
UCS 500N5.3 Ultra compact simulator with EFT/5,
VCS/5 and PFS/N5;
1ph CDN 400VAC (L-N) / 32A
UCS 500N5.7 Ultra compact simulator with EFT/N5
and VCS/N5; 1ph CDN 300V (p-n) /
16A (but without PFS module)
UCS 500N5.8 Ultra compact simulator for EFT/N5
and PFS/N5; 1ph CDN 300V AC/DC
(p-n) / 16A
www.emtest.com © EM TEST > PAGE 7/8