Atec EM-Test-UCS500N Series User Manual

Page 2

DATA SHEET > UCS 500N5 > 20131118

TECHNICAL DETAILS

BENEFITS

ALL IN ONE - ALL WHAT YOU NEED FOR YOUR TESTS

The UCS 500N5 includes everything necessary to conduct
fully compliant tests. The power mains supply for the
controls and for the DUT is separate to render it more
flexible to use with different DUT supply voltages.
The UCS 500N5 can be operated manually from the front
panel or by remote via the built-in USB or GPIB interface.
Fail inputs allow to control an ongoing test sequence
based on the status of the DUT. Monitoring outputs (BNC)
are offered for easy signal measurement and verification.
Safety features such as interlock and warning lamp
control are available.
Pre-programmed Standard Test routines allow highest
user convenience. Still the UCS 500N5 offers the Quick
Start test routine where parameters can be changed
on-line during the test to evaluate the susceptibility level
of an individual DUT.

OPERATION

EASY TO OPERATE

Front panel menu and function keys enable the user to
program his test routines quickly and accurately. The
cursor allows fast control of all test parameters of the
programmed routine, thus test procedures are simplified
and confidence is generated that every step is carried out
correctly.

SOFTWARE

IEC.CONTROL SOFTWARE FOR CONTROL AND
DOCUMENTATION

Outstanding user convenience, clearly structured
windows and operation features and the EM TEST
standards library along with the flexibility to generate
user specific test sequences very easily are the main
features of iec.control software. The software is
automatically configured according to the connected EM
TEST generators. Extensive reporting capabilities help the
user to create test reports that meet international
requirements.
iec.control is supported by Windows 2000, Windows XP,
Windows Vista and Windows 7. Remote control is
achieved either via USB or GPIB. iec.control supports a
wide range of GPIB cards of National Instruments.

OTHER MODELS

UCS 500N SERIES - COMPACT TESTERS UP TO 7KV

The UCS 500N ultra-compact testers for EFT/burst, Surge
and Power Fail are available in two different models; with
voltage capability up to 5.5kV or up to 7kV.