Atec EM-Test-UCS500N7 User Manual

Page 2

DATA SHEET > UCS 500N7 > 20120518

TECHNICAL DETAILS

BENEFITS

ALL IN ONE AND MORE - ALL WHAT YOU NEED FOR TESTS
UP TO 7KV

The UCS 500N7 includes everything necessary to conduct
fully compliant tests at levels that go far beyond common
test requirements.
Surge can be test up to 7.0kV either according to IEC
61000-4-5 or ANSI/IEEE C62.41. The UCS 500N7 offers an
integrated Ringwave module (optional) as per ANSI/IEEE
C62.41 and IEC 61000-4-12 for ringwave tests on mains
supply lines.
The UCS 500N7 can be operated manually from the front
panel or by remote via the built-in USB or GPIB interface.
Fail inputs allow to control an ongoing test sequence
based on the status of the DUT. Monitoring outputs (BNC)
are offered for easy signal measurement and verification.
Safety features such as interlock and warning lamp
control are available.
Pre-programmed Standard Test routines allow highest
user convenience. Still the UCS 500N7 offers the Quick
Start test routine where parameters can be changed
on-line during the test to evaluate the susceptibility level
of an individual DUT, a most appreciated benefit for tests
at development stage.

OPERATION

EASY TO OPERATE

Front panel menu and function keys enable the user to
program his test routines quickly and accurately. The
cursor allows fast control of all test parameters of the
programmed routine, thus test procedures are simplified
and confidence is generated that every step is carried out
correctly.

SOFTWARE

IEC.CONTROL SOFTWARE FOR CONTROL AND
DOCUMENTATION

Outstanding user convenience, clearly structured
windows and operation features and the EM TEST
standards library along with the flexibility to generate
user specific test sequences very easily are the main
features of iec.control software. The software is
automatically configured according to the connected EM
TEST generators. Extensive reporting capabilities help the
user to create test reports that meet international
requirements.
iec.control is supported by Windows 2000, Windows XP,
Windows Vista and Windows 7. Remote control is
achieved either via USB or GPIB. iec.control supports a
wide range of GPIB cards of National Instruments.

OTHER MODELS

UCS 500N SERIES - COMPACT TESTERS UP TO 7.0KV

The UCS 500N ultra-compact testers for EFT/burst, Surge
and Power Fail are available in two different models; with
voltage capability up to 4.4kV or up to 7.0kV.

AUXILIARY DEVICES

CNI 503 - 3PHASE COUPLING/DECOUPLING NETWORKS
FOR BURST AND SURGE

EM TEST offers a range of fully automatic 3-phase
coupling/decoupling networks for burst and surge to
extend the test capability for three-phase DUTs. The
networks have a rated current of up to 100A.

MV 2616 - MOTORISED VARIAC FOR VOLTAGE VARIATION

A motorised variac is offered as an alternative to the
tapped autotransformers for voltage dips/interruptions
and voltage variation tests as per IEC 61000-4-11. The
motorised variac can also be used for automated
magnetic field tests.

CNV 504N/508N - SURGE COUPLING/DECOUPLING
NETWORKS FOR SIGNAL/DATA LINES

CNV 504N/508N coupling/decoupling networks are
available to perform surge tests on I/O lines, signal/data
lines and telecom lines as per IEC 61000-4-5.