Atec Agilent-E7401A-02A-03A-04A-05A - Manual (Page 4)

4
RF input VSWR 6 (at tuned frequency, 10 dB attenuation)
E7401A
1 MHz to 1.5 GHz 1.35:1
E7402A
100 Hz to 100 kHz 1.1:1 (Option UKB)
9 kHz to 100 kHz 2:1
100 kHz to 3 GHz 1.4:1
E7403A/04A
100 Hz to 100 kHz 1.1:1 (Option UKB)
9 kHz to 100 kHz 2:1
100 kHz to 6.7 GHz 1.3:1
6.7 kHz to13.2 GHz 1.5:1
E7405A
100 Hz to 100 kHz 1.1:1 (Option UKB)
9 kHz to 6.7 GHz 1.3:1
6.7 GHz to 13.2 GHz 1.5:1
13.2 GHz to 22 GHz 2:1
22 GHz to 26.5 GHz 2.2:1
Resolution bandwidth switching uncertainty
(Referenced to 1 kHz RBW, at reference level)
10 Hz to 3 MHz RBW
±0.3 dB
5 MHz RBW ±0.6 dB
10 Hz to 300 Hz RBW ±0.3 dB
Reference level
Range
-149 dBm to maximum mixer level
+ attenuator setting
Resolution
Log scale ±0.1 dB
Linear scale ±0.12% of reference level
Accuracy (reference level ±0.3 dB (-10 dBm to –60 dBm)
-attenuator setting ±0.5 dB (-60 dBm to –85 dBm)
+ preamp gain) ±0.7 dB (-85 dBm to –90 dBm)
Display scale fidelity
Log maximum cumulative
RBW
≥ 1 kHz
dB below reference level Typical
0 dB (reference) ±0.00 dB ±0.00 dB
> 0 dB to 10 dB ±0.3 dB ±0.08 dB
> 10 dB to 20 dB ±0.4 dB ±0.09 dB
> 20 dB to 30 dB ±0.5 dB ±0.10 dB
> 30 dB to 40 dB ±0.6 dB ±0.23 dB
> 40 dB to 50 dB ±0.7 dB ±0.35 dB
> 50 dB to 60 dB ±0.7 dB ±0.35 dB
> 60 dB to 70 dB ±0.8 dB ±0.39 dB
> 70 dB to 80 dB ±0.8 dB ±0.46 dB
> 80 dB to 85 dB ±1.15 dB ±0.79 dB
RBW ≤ 300 Hz (Span >0 Hz)
0 dB to 98 dB ±(0.3 dB + 0.01 x dB from
reference level)
≥ 98 dB to 120 dB
±(2.0 dB from reference level) 6
Log incremental accuracy
0 dB to 80 dB ±0.4 dB/4 dB from reference level
Linear accuracy ± 2% of reference level
Linear to log switching ±0.15 dB at reference level
Spurious responses
Second harmonic distortion
E7401A
2 MHz to 750 MHz < -75 dBc for -40 dBm tone at
input mixer
5
E7402A/03A/04A/05A
10 MHz to 500 MHz < -65 dBc for -30 dBm tone at
input mixer
5
500 MHz to 1.5 GHz < -75 dBc for -30 dBm tone at
input mixer
2
1.5 GHz to 2.0 GHz < -85 dBc for -10 dBm tone at
input mixer
2
> 2.0 GHz < -100 dBc for -10 dBm tone at
input mixer
5 (or below displayed
average noise level)
Third order intermodulation distortion
E7401A
100 MHz to 1.5 GHz < -87 dBc for two -30 dBm tones at
input mixer 5 and > 50 kHz separation
E7402A/03A/04A/05A
100 MHz to 6.7 GHz < -85 dBc for two -30 dBm tones at
input mixer 5 and > 50 kHz separation
> 6.7 GHz < -75 dBc for two -30 dBm tones at
input mixer 5 and > 50 kHz separation
Other input related spurious
< -65 dBc, for -20 dBm tone at
input mixer
5
Residual responses (input terminated and 0 dB attenuation)
150 kHz to 6.7 GHz
< -90 dBm
Amplitude ref. output
E7402A,03A,04A,05A
Amplitude
-20 dBm (nominal)
FM demodulation 6
Input level -60 dBm + attenuator setting
Signal level 0 to -30 dB below reference level
Quasi-peak detector specifications
The EMC analyzer displays the quasi-peak amplitude of a pulse
radio frequency on continuous wave signals. Amplitude response
conforms with Publication 16 of Comite International Special des
Perturbations Radioelectrique (CISPR) Section 1, Clause 2.