Atec Agilent-E7401A-02A-03A-04A-05A - Manual

These specifications apply to the Agilent Technologies E7401A,
E7402A, E7403A, E7404A and E7405A EMC analyzers.
Specifications
All specifications apply over 0° C to +55° C unless otherwise
noted and are covered by the product warranty. The analyzer will
meet its specifications when: it’s within the one year calibration
cycle, AUTO ALIGN [ALL] is selected, stored a minimum 2 hours
within the operating temperature range, turned on for at least 5
minutes, and Align Now RF has been run once every 24 hour period.
Typical performance describes the level at which 80% of the units will
meet or exceed with a 95% confidence level over 20 to 30° C, but is
not covered in the product warranty. Characteristics describe
expected product performance levels that are not covered in the
product warranty.
Frequency specifications
Frequency range
E7401A
50
Ω
9 kHz to 1.5 GHz
E7402A 9 kHz to 3.0 GHz
dc coupled 30 Hz 6 to 3.0 GHz
ac coupled 100 kHz 6 to 3.0 GHz
E7403A
dc coupled 9 kHz to 6.7 GHz
dc coupled (Option UKB) 30 Hz 6 to 6.7 GHz
ac coupled 100 kHz to 6.7 GHz
Band
0
9 kHz to 3.0 GHz
1 2.85 GHz to 6.7 GHz
E7404A
dc coupled 9 kHz to 13.2 GHz
dc coupled (Option UKB) 30 Hz 6 to 13.2 GHz
ac coupled 100 kHz to 13.2 GHz
Band LO harmonic = N
0
1- 9 kHz to 3.0 GHz
(Option UKB) 30 Hz 6 to 3.0 GHz
1 1- 2.85 GHz to 6.7 GHz
2 2- 6.2 GHz to 13.2 GHz
E7405A 9 kHz to 26.5 GHz
Band LO harmonic = N
0
1- 9 kHz to 3.0 GHz
0 (Option UKB) 30 Hz 6 to 3.6 GHz
1 1- 2.85 GHz to 6.7 GHz
2 2- 6.2 GHz to 13.2 GHz
3 4- 12.8 GHz to 19.2 GHz
4 4- 18.7 GHz to 26.5 GHz
Frequency reference (Option 1D5)
Aging ±2 x 10 -6 /year ±1 x 10 -7 /year
Temperature stability ±5 x 10 -6 ±1 x 10 -8
Settability ±5 x 10 -7 ±1 x 10 -8
Frequency readout accuracy
(start, stop, center, marker)
±(frequency indication
x frequency reference error
1
+ span accuracy + 15% of RBW
+ 10 Hz) + 1 Hz x N
4
Marker frequency counter 2
Accuracy 3 ±(marker frequency x frequency
reference error
1 + counter resolution)
Counter Resolution Selectable from 1 Hz to 100 kHz
Frequency span
Range
0 Hz (zero span), 100 Hz x N 4 to
the range of the spectrum analyzer
Resolution 2 Hz x N 4
Accuracy (> 2000 sweep points)
Sweep type linear ±0.5% of span
Sweep type log ±2% of span (characteristic)
Agilent
E7400 A-series EMC Analyzers
Data Sheet
Manufacturers > Agilent Technologies
Categories > EMC Test Equipment > Conducted \ Radiated Emissions Test > EMI Analyzers \ EMC Receivers
Agilent E7405A EMC Analyzer Product Page
How-To Video