Atec Baker-DX Series User Manual
Skf static motor analyzer baker dx, Dx capabilities and added flexibility, Baker dx benefits
![background image](/manuals/318109/1/background.png)
Technical speci cations and product description
SKF Static Motor Analyzer
Baker DX
The SKF Static Motor Analyzer Baker DX unit offers more capabilities
to analyze all insulation and motor circuits in AC and DC motors, gen-
erators and coils. These instruments offer Insulation Resistance (IR),
Polarization Index (PI), Dielectric Absorption (DA), DC HiPot/Step
Voltage and Surge tests to evaluate all the insulation in motors and
coils. The motor circuit can also be analyzed utilizing Resistance,
Impedance, Capacitance, Phase Angle and Dissipation Factor/Quality
Factor measurements.
DX capabilities and added flexibility
Low voltage testing has been added to the Baker DX. This allows for
a more complete testing solution for predictive maintenance or shop
quality management. The low voltage tests can supply up to 600 mA
and frequencies from 50 to 4 000 Hz.
The Baker DX also offers a modular design that allows you to con-
figure a DX with only the test capabilities needed for your specific
application. For example, it can be only a high voltage or a low volt-
age tester or you can add all the capability to have a unit that has
both high voltage and low voltage testing capabilities in one unit.
Simply configure the instrument to best fit the application in which it
will be used.
Baker DX benefits
4 to 40 kV voltage testing capability to test fractional HP motors to
40 megawatt generators
High and low voltage testing capability in one unit to test the
motor circuit and all the insulation
Intuitive graphical user interface with touch screen
USB printer interface to quickly print results
Coil mode quickly analyze coils and store all data
Impulse mode allows the operator to quickly apply voltage when
testing coils and DC motors
Fully test DC motors, including bar to bar armature testing
Push to Test (PTT) lock to hold voltage during DC tests
Modular design to meet your testing needs
Internal test storage capacity 2 GB
The Baker DX is the smallest, lightest 12 kV surge tester on the
market