Atec Associated-Research-7520DT-7550DT-7564S4 - Manual (Page 5)

SPECIFICATIONS
17
GENERAL SPECIFICATIONS
PLC Remote Control Input - Test, Reset, Recall memory 1, 2 and 3
Output - Pass, Fail, Test-in-Process
Memory Allows storage of up to 50 groups different test programs
and 8 step/each memory. Step is not available on 7520DT
Security Programmable password lockout capability to avoid
unauthorized access to test set-up program.
LCD Contrast Setting 9 ranges set by the numeric keys on the front panel.
Buzzer Volume Setting 10 ranges set by the numeric key on the front panel.
Calibration Software and adjustments are made through front panel.
Mechanical Bench or rack mount with tilt up front feet.
Dimension 7540DT, 7550DT and 7564SA:
(W x H x D) 17 x 5.8 x 20.3 in. (432 x 147 x 515 mm)
7520DT and 7530DT:
(W x H x D) 17 x 5.8 x 12 in. (432 x 147 x 305 mm)
Weight 7564SA without scanner 52.5 lbs (24 Kgs)
7564SA with built-in scanner 57.0 lbs (26 Kgs)
7550DT without scanner 50.5 lbs (23 Kgs)
7550DT with built-in scanner 55.0 lbs (25 Kgs)
7540DT with 4 port scanner 39.6 lbs (18 Kgs)
7540DT with 8 port scanner 41.8 lbs (19 Kgs)
7530DT scanner not available 24.8 lbs (11.27 Kgs)
7520DT scanner not available 24.8 lbs (11.27 Kgs)
Scanner Port Two Port Maximum including the built-in scanner.
Not available on 7520DT, 7530DT and 7540DT.
Scanner
Built-in Option
High Voltage x 4 Ports (7540DT only)
High Voltage x 8 Ports (75/40/50DT and 7564SA)
Ground Bond x 8 Ports (7564SA only)
Recycled Equipment (410)685-1997 www.recycledequipment.com email: [email protected]