Atec Anritsu-MT9083A - Manual (Page 9)

ISO 9000:2001 certified. IMT9083A-SPEC01-0609-A4 ©2006 Anritsu. All Rights Reserved . Page 9 of 14
Loss Test Set Specifications – Standard on all models
*10
Stabilized Light Source
(through OTDR port)
Standard Integrated Power Meter
*13
(through OTDR port)
Item Specification Item Specification
Wavelength Same as OTDR Maximum Input +10 dBm
Spectral Width *
9 <10nm (1383: <1nm) Measurement Range -50 to -5 dBm
Fiber Type Same as OTDR Fiber Type Same as OTDR
Optical Connector Same as OTDR Optical Connector Same as OTDR
Output Power
*9
–5 ±1.5 dBm Accuracy
*16
+6.5%
Output Stability
*11
+0.1dB
Modes of Operation
*12
CW, 270Hz, 1kHz, 2kHz
Laser Safety Same as OTDR
Supported Wavelengths 1310, 1550, 1625 nm plus
* 1490 nm (056, 058, 060)
* 1383 nm (059)
* 1650 nm (050, 051, 053, 054, 055,
057, 061)
Loss Test Set Specifications – Optional on all Models*13
Power meters (003, 004, and 005) and visual light source must be added as separate line items.
Optical Power Meter (Option 003, 004, 005) *13
Option Number MT9083A-003 MT9083A-004 MT9083A-005
Supported Fiber Type Single Mode: 8-10/125
um (G.652), Multimode:
62.5/125um
Single Mode: 8-10/125 um (G.652)
*PC only for UPC connector, angled
only for APC connector*
Single Mode: 8-10/125 um
(G.652)
Measurement Range *14 +3 to -70 dBm +23 to -50 dBm +30 to -43 dBm
Wavelength Range 750 to 1700 nm 1200 to 1700 nm
Calibrated Wavelengths 850, 1300, 1310, 1383,
1490, 1550, 1625, 1650
nm
1310, 1383, 1490, 1550, 1625, 1650 nm
Optical Connector Universal – uses
MA9005A adapters
Universal – uses UNIV-XX adapters
(same as OTDR)
Universal – uses MA9005B
adapters
Accuracy *15 +5%
Linearity +3%
Features Store reference, loss table, recognition of modulated light (270Hz, 1kHz, 2kHz)
Visible Light Source (Option 002)
Central wavelength 650 nm ±15 nm (at 25 o C)
Optical output -2 ± 1.5 dBm CW
Output optical fiber 8-10/125 µm, SMF (ITU-T G.652)
Optical connector 2.5mm universal
Optical safety IEC Pub 60825-1Class 3R, 21CFR1040.10
Environmental Same as OTDR
Notes
*9
CW, 25oC, SMF or MMF
*10
Light source not available at 780 nm, power meter not available at 780, 850, 1300 or 1650 nm
*11
CW, 0° to 40 (±1 ) difference between max/min. values over 1 minute, SM fiber
*12
Modulation +1.5% with 10 minute warm up
*13
If option 003, 004 or 005 is ordered, the standard integrated power meter is not available
*14
Peak power, subtract 3 dB for modulated tones
*15
CW, model 003: @-10 dBm 1310 and 1550 nm, model 004/005: @0 dBm
*16
CW input, -20 dBm @ 1550 nm, 23oC