Atec Anritsu-S331E-S332E-S361E-S362E - Manual (Page 5)

Page 5 of 16
Site Master™ S331E, S332E, S361E, S362E Specifications
Spectrum Analyzer (S332E, S362E) (continued)
Spectral Purity
SSB Phase Noise @ 1 GHz –100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset
–105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset
–115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range > 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range DANL to +26 dBm
Display Range 1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range –120 dBm to +30 dBm
Attenuator Range 0 to 55 dB, 5.0 dB steps
Maximum Continuous Input +35 dBm
Amplitude Units Log Scale Modes: dBm, dBV, dBmv, dBμV
Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW
Amplitude Accuracy
100 kHz to 4.0 GHz ± 1.25 dB, ± 0.5 dB typical
> 4.0 GHz to 6 GHz ± 1.50 dB, ± 0.5 dB typical
Displayed Average Noise Level (DANL)
Preamp Off
(Reference level -20 dBm)
Preamp On
(Reference level -50 dBm)
(RBW Normalized to 1 Hz, 0 dB attenuation) Maximum Typical Maximum Typical
10 MHz to 2.4 GHz –141 dBm –146 dBm –157 dBm –162 dBm
> 2.4 GHz to 4 GHz –137 dBm –141 dBm –154 dBm –159 dBm
>4 GHz to 5 GHz –134 dBm –138 dBm –150 dBm –155 dBm
> 5 GHz to 6 GHz –126 dBm –131 dBm –143 dBm –150 dBm
(RBW = 10 Hz, 0 dB attenuation)
10 MHz to 2.4 GHz –131 dBm –136 dBm –147 dBm –152 dBm
> 2.4 GHz to 4 GHz –127 dBm –131 dBm –144 dBm –149 dBm
> 4 GHz to 5 GHz –124 dBm –128 dBm –140 dBm –145 dBm
> 5 GHz to 6 GHz –116 dBm –121 dBm –133 dBm –140 dBm
Spurs
Residual Spurious < –90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious < –75 dBc (0 dB attenuation, –30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz)
Exceptions, typical < –70 dBc @ < 2.5 GHz, with 2072.5 MHz Input
< –68 dBc @ F1-280 MHz with F1 Input
< –70 dBc @ F1 + 190.5 MHz with F1 Input
< –52 dBc @ 7349 - 2F2 MHz, with F2 Input, where F2 < 2424.5 MHz
< –55 dBc @ 190.5 ± F1/2 MHz, F1 < 1 GHz
Third-Order Intercept (TOI)
Preamp Off (–20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz +16 dBm
2400 MHz +20 dBm
200-2200 MHz +25 dBm, typical
> 2.2 GHz to 5.0 GHz +28 dBm, typical
> 5.0 GHz to 6.0 GHz +33 dBm, typical
Second Harmonic Distortion
Preamp Off, 0 dB input attenuation, –30 dBm input
50 MHz –56 dBc
> 50 MHz to 200 MHz –60 dBc, typical
> 200 MHz to 3000 MHz –70 dBc, typical
VSWR
2:1, typical