beautypg.com

Atec Anritsu-S331E-S332E-S361E-S362E User Manual

Page 4

background image

Page 4 of 16

Site Master™ S331E, S332E, S361E, S362E Specifications

Spectrum Analyzer (S332E, S362E)

Measurements

Smart Measurements

Field Strength (uses antenna calibration tables to measure dBm/m

2

or dBmV/m)

Occupied Bandwidth (measures 99% to 1% power channel of a signal)
Channel Power (measures the total power in a specified bandwidth)
ACPR (adjacent channel power ratio)
AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
C/I (carrier-to-interference ratio)
Emission Mask
Coverage Mapping (requires Option 0431)

Setup Parameters

Frequency

Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment

Amplitude

Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection

Span

Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span

Bandwidth

RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW

File

Save, Recall, Delete, Directory Management

Save/Recall

Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event

Save-on-Event

Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All

Delete

Selected File, All Measurements, All Mode Files, All Content

Directory Management

Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB

Application Options

Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)

Sweep Functions

Sweep

Single/Continuous, Sweep Mode (Fast, Performance, No FFT), Reset, Detection,
Minimum Sweep Time, Trigger Type, Gated Sweep (see Option 0090)

Detection

Peak, RMS, Negative, Sample, Quasi-peak

Triggers

Free Run, External, Video, Change Position, Manual

Trace Functions

Traces

Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations

Trace A Operations

Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)

Trace B Operations

A B, B  

C, Max Hold, Min Hold

Trace C Operations

A  C, B  

C, Max Hold, Min Hold, A - B  C, B - A  C, Relative Reference (dB), Scale

Marker Functions

Markers

Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,
Marker Table (On/Off), All Markers Off

Marker Types

Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker

Marker Auto-Position

Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,
Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level

Marker Table

1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset

Limit Line Functions

Limit Lines

Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit

Limit Line Edit

Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right

Limit Line Move

To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1

Limit Line Envelope

Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope

Limit Line Advanced

Type (Absolute/Relative), Mirror, Save/Recall

Frequency

Frequency Range

100 kHz to 4 GHz (S332E), 100 kHz to 6 GHz (S362E) (usable to 0 Hz)

Tuning Resolution

1 Hz

Frequency Reference

Aging: ± 1.0 ppm/year

Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On

Frequency Span

10 Hz to 4 GHz including zero span (S332E), 10 Hz to 6 GHz including zero span (S362E)

Sweep Time

Minimum 100 ms, 10 µs to 600 seconds in zero span

Sweep Time Accuracy

± 2% in zero span

Bandwidth

Resolution Bandwidth (RBW)

10 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth)

Video Bandwidth (VBW)

1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable)

RBW with Quasi-Peak Detection

200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth)

VBW with Quasi-Peak Detection

Auto VBW is On, RBW/VBW = 1