Atec Anritsu-S331E-S332E-S361E-S362E - Manual (Page 3)

Site Master™ S331E, S332E, S361E, S362E Specifications
Cable and Antenna Analyzer (continued)
Measurement Accuracy
Corrected Directivity > 42 dB, OSL Calibration
> 38 dB, InstaCal™ Calibration
Measurement Uncertainty
Page 3 of 16
Optical Distance-to-Fault Module (P/N ODTF-1)
Wavelength 1550 nm, typical
Fiber Type Single Mode Fiber
Event Resolution 10.2 cm (0.335 ft) maximum, or 150 / (n*ΔF), ΔF in MHz, n is IOR
Horizontal Range 1020 meter (3345 ft) maximum, or (#dp-1) *Event Resolution
Optical Dynamic Range 30 dB
Optical Output Power 3 dBm, typical
RF Connector N(m)
Optical Connector FC/APC
Datasheet 11410-00478 (for complete specifications)
PIM Analyzer (Option 0419) (Requires PIM Master™)
See Product Brochure 11410-00546
2-Port Transmission Measurement (Option 0021)
Frequency
Frequency Range 2 MHz to 4 GHz (S331E, S332E), 2 MHz to 6 GHz (S361E, S362E)
Frequency Resolution 10 Hz
Output Power
High 0 dBm, typical
Low –30 dBm, typical
Dynamic Range
2 MHz to 4 GHz 80 dB
4 GHz to 6 GHz 70 dB
Application Options Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)
Bias-Tee (Option 0010)
Setup On/Off, Voltage, Current (Low/High)
Voltage Range +12 V to +32 V
Current (Low/High) 250 mA/450 mA, 1 A surge for 100 ms
Resolution 0.1 V