Atec Anritsu-S412D - Manual (Page 8)

8
Built-in Multi-Functions to Increase
Technician \ Productivity
Channel Scanner (Option 0027)
The Channel Scanner option measures the power of multiple transmitted
signals, and is very useful for measuring channel power in P25 and
iDEN systems.
Transmission Measurement (Option 0021)
Transmission Measurement is a two-port measurement covering the 25 MHz
to 1.6 GHz frequency range. It is a signal source providing the ability to
measure loss or gain of two-port devices such as filters, cables, attenuators,
duplexers and tower mounted amplifiers. Transmission measurement can
also be used to make antenna-to-antenna isolation measurements and for
repeater testing.
Built-in GPS Provides Location Information
(Option 0031)
GPS provides location (latitude, longitude, altitude) and UTC time information.
The LMR Master can stamp each trace with location information to check if
the measurements were taken at the right location. The LMR Master stores the
GPS location information until the unit is turned off, so that the stored location
information can be used to stamp traces taken indoors at the same cell site
location. The GPS option is offered with a magnet mount antenna with a
15 foot (~ 5m) cable to mount on a car or other handy surface.
GPS provides location and
UTC time information.