Atec Anritsu-S412D - Manual (Page 3)

3
Function Benefits
Cable and Antenna Analyzer Quickly finds small, hard to identify faults before major failures occur.
Spectrum Analyzer Easily locate, identify and record various signals with incredible accuracy.
Power Meter Performs accurate power measurements, reducing holes and interference.
High Accuracy Power Meter Perform accurate RMS power measurements for both CW and modulated signals.
Channel Scanner Measures frequency, bandwidth and power of multiple transmitted signals.
Transmission Measurement
Built-in signal source to measure gain or loss of two port devices, as well as tower mounted
amplifier antenna isolation measurements and repeater testing.
Interference Analyzer
Identify and locate interfering signals that cause dropped calls and coverage
problems. Intermittent problems can be identified using spectrograms.
GPS Receiver Built-in receiver for location information.
P25 Signal Analyzer
RF measurements, demodulation and BER (1011 Hz pattern) help the technician to quickly check
LMR system performance.
P25 Talk-Out Coverage Measurements Received Power and BER (1011 Hz pattern) along with GPS location and time.
iDEN Signal Analyzer RF and demodulation measurements to monitor iDEN/WiDEN.
Variable Bias Tee Eliminates the need for an external power supply when biasing tower mounted amplifier.
The LMR Master is the only instrument you
need for complete LMR system maintenance
and trouble-shooting.
Snap-in field replaceable
battery location
RS-232 Interface
Transfer stored data to and from a personal computer
(PC) via a serial cable for further analysis. Use PC to
automatically control and collect data in the field.
TFT Color Display
Standard TFT (640x480)
color display featuring variable
brightness control. Viewable
in direct sunlight.
Rugged and Reliable
Chassis Design
Ruggedized, lightweight,
compact, high-impact
housing is designed to
withstand repeated drops
and rough handling. Weather
resistant seals and rubber
membrane keypad protect
unit from dirt and moisture.
Function Keys
Four dedicated function keys
simplify measurement tasks.
External DC Power Port
Save and Recall Display
Up to 300 memory locations.
Alphanumeric data labeling and
automatic time/date stamp simplify
data management.
AM/FM Receiver
with Internal Speaker
Built-in AM/FM demodulator enables testing and
trouble-shooting of wireless communications
systems. An internal speaker and headphone
jack are included.
Limit
Create simple pass/fail measurements
with a single limit line, upper
and/or lower mask limit lines.
Marker
Six markers for more
comprehensive measurements.
Save and Recall Setup
Save 10 to 13 setups for fast
repeatable testing (mode dependent).
External Trigger and External
Frequency Reference In
Cable and Antenna
Analyzer Port
GPS Spectrum Analyzer
and Power Meter Port
Soft Keys
Intuitive soft key
menu and user
interface.