American Expedition Vehicles Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit User Manual
Page 7
Page 7 of 20
B. INSTALL THE SADDLE BLOCK
1. Install the
plastic Saddle Block using the 3/8”x1” bolts
with 3/8
” washers under the head of each bolt. Install the
bolt into the countersink on the Saddle block. Use the
3/8” Flange nuts on the inside surface of the AEV Tire
Carrier Bracket.
2. Adjust the Saddle Block to its MIDDLE adjustment.
3. Using hand tools only torque the bolts down to 20 ft/lbs
(27.1 N-m) max.
4. 2010+ MODELS ONLY: The exhauster on 2010s is wider
than earlier models and must have the top left corner
trimmed in order to fit the AEV Bracket.
See also other documents in the category American Expedition Vehicles For the car:
- JK WINCH MOUNT (10 pages)
- JK WINCH MOUNT CALL OF DUTY (5 pages)
- JK snorkel Kit (9 pages)
- Fuel caddy (7 pages)
- JK Roof Rack (11 pages)
- Rear Vision System (10 pages)
- JK Rear Bumper/Tire Carrier (19 pages)
- JK Front Bumper Skid Plate (4 pages)
- JK Heat Reduction Hood (4 pages)
- Jk WASHER Nozzle Kit (1 page)
- JK Tubeless Front Bumper (10 pages)
- JK Differential Cover (4 pages)
- JK Replacement Tow Loops (5 pages)
- JK Hi-Lift/Pull-Pal Mount (6 pages)
- JK Pump Kit, Rear Bumper Water Tank (4 pages)
- JK Slider - Rear Differential Skid Plate (2 pages)
- JK Builders Rear Corner Guards (10 pages)
- Full Rail Kit for JK Roof Rack (4 pages)
- JK Cargo Liner (1 page)
- JK CORDURA Rear Seat Covers (4 pages)
- JK Jack Base (1 page)
- JK High Steer Kit (9 pages)
- JK Rear Track Bar Kit (12 pages)
- JK Geometry Correction Front Control Arm Drop Brackets (5 pages)
- ProCal Module User Guide (10 pages)
- ProCal Module Quick Reference Guide (2 pages)
- JK 2.0 Spacer Suspension (13 pages)
- JK DualSport XT Suspension 2.5 (11 pages)
- JK DualSport SC Suspension 3.5/4.5 (17 pages)
- AEV-Nth JK Suspension Systems (14 pages)
- JK Hemi Builder Kit - Installation Guide for 07-11 JK Wrangler (36 pages)
- JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler (37 pages)
- JK Pintler Beadlock Wheels (3 pages)
- 4.0L Universal Oilpan Skid Plate (3 pages)
- Tummy Tucker – TJ Wrangler NON-Rubicon (11 pages)
- Tummy Tucker – TJ Rubicon models (13 pages)
- Brute Double Cab Tonneau Cover (6 pages)
- Preparation of the Jeep body tub (15 pages)
- Brute Frame (20 pages)
- Cab Closeout (6 pages)
- Brute Bed (7 pages)
- Brute Hardtop (8 pages)
- TJ Highline Body Kit (13 pages)