American Expedition Vehicles Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit User Manual
Page 5
Page 5 of 20
B. REMOVAL OF THE FACTORY SPARE TIRE CARRIER
1. NOTE: If you are installing the AEV Rear Bumper ONLY you do not have to remove the
factory spare tire carrier and can proceed to step I (page 14).
2. Remove the vent bezel on the inside of the tailgate to access the connector for the CHMSL
(Center High Mount Stop Lamp). Use a pry tool to remove as shown.
3. Remove the eight bolts that attach the factory spare tire carrier to the tailgate. Reinstall the
four bolts on the right side of the tailgate and SAVE the other four bolts to install the AEV Tire
Carrier Bracket later.
4. Remove the rubber tire bumpers from the Tailgate.
5. If using the AEV CHMSL kit (PART#10404001AA) refer to the instructions at the end of this
document. NOTE: The stock CHMSL is not compatible with the AEV Tire Carrier.
- JK WINCH MOUNT (10 pages)
- JK WINCH MOUNT CALL OF DUTY (5 pages)
- JK snorkel Kit (9 pages)
- Fuel caddy (7 pages)
- JK Roof Rack (11 pages)
- Rear Vision System (10 pages)
- JK Rear Bumper/Tire Carrier (19 pages)
- JK Front Bumper Skid Plate (4 pages)
- JK Heat Reduction Hood (4 pages)
- Jk WASHER Nozzle Kit (1 page)
- JK Tubeless Front Bumper (10 pages)
- JK Differential Cover (4 pages)
- JK Replacement Tow Loops (5 pages)
- JK Hi-Lift/Pull-Pal Mount (6 pages)
- JK Pump Kit, Rear Bumper Water Tank (4 pages)
- JK Slider - Rear Differential Skid Plate (2 pages)
- JK Builders Rear Corner Guards (10 pages)
- Full Rail Kit for JK Roof Rack (4 pages)
- JK Cargo Liner (1 page)
- JK CORDURA Rear Seat Covers (4 pages)
- JK Jack Base (1 page)
- JK High Steer Kit (9 pages)
- JK Rear Track Bar Kit (12 pages)
- JK Geometry Correction Front Control Arm Drop Brackets (5 pages)
- ProCal Module User Guide (10 pages)
- ProCal Module Quick Reference Guide (2 pages)
- JK 2.0 Spacer Suspension (13 pages)
- JK DualSport XT Suspension 2.5 (11 pages)
- JK DualSport SC Suspension 3.5/4.5 (17 pages)
- AEV-Nth JK Suspension Systems (14 pages)
- JK Hemi Builder Kit - Installation Guide for 07-11 JK Wrangler (36 pages)
- JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler (37 pages)
- JK Pintler Beadlock Wheels (3 pages)
- 4.0L Universal Oilpan Skid Plate (3 pages)
- Tummy Tucker – TJ Wrangler NON-Rubicon (11 pages)
- Tummy Tucker – TJ Rubicon models (13 pages)
- Brute Double Cab Tonneau Cover (6 pages)
- Preparation of the Jeep body tub (15 pages)
- Brute Frame (20 pages)
- Cab Closeout (6 pages)
- Brute Bed (7 pages)
- Brute Hardtop (8 pages)
- TJ Highline Body Kit (13 pages)