beautypg.com

American Expedition Vehicles Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit User Manual

Page 6

background image

Page 6 of 20

INSTALLATION OF THE AEV TIRE CARRIER WITH OR WITHOUT

THE AEV REAR BUMPER

(IF INSTALLING THE AEV REAR BUMPER ONLY PROCEED TO PAGE 14)

A. INSTALL THE AEV TAILGATE BRACKET
1. Install the AEV Tailgate Bracket using the four factory bolts from the stock tire carrier.

Install the bracket so that it is centered both vertically and horizontally on the bolt holes.
The easiest way to do this is to install two bolts hand tight at first, adjust the bracket and
install and tighten all the bolts.