American Expedition Vehicles Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit - Manual (Page 10)

Page 10 of 20
E. POSITION SPINDLE PROPERLY ON FRAME
1. Close tailgate completely. Be sure Tire Carrier is seated properly into the Spindle
Housing.
2. With the Spindle Housing on the frame and the ½” bolts hand tight, close the Tire Carrier
and with one hand pressing the Tire Carrier into the Saddle Bracket, use the other hand
to press on the top of the Tire Carrier. This will seat the Spindle Housing properly on the
frame. The goal is to have the Tire Carrier vertical or angled in towards the car if
possible. Tighten the forward ½” bolt on the Spindle Housing FIRST and then tighten the
rearward ½” bolt.