Alpha Technologies PWE Battery Enclosure (BE) - Manual (Page 17)

1. Installation
17
033-077-C0-002 Rev. B
1.1.7. Final Assembly
1. Reinstall the BE enclosure lid
2. Install the new front door
3. Run a new #6 solid copper grounding wire from the grounding
lug on the back of the BE enclosure to the grounding rod at the
base of the pole (Fig. 1-9).
1.1 BE Installation, continued
Fig. 1-8 Door and Lid In Place
Fig. 1-9 Grounding Lug