ABUS TVIP40000 User Manual
Page 95
95
English
Refer to the operating manual of your PTZ device for the exact PTZ commands.
“Camera ID” Defines the camera ID.
“PTZ driver” Defines the protocol of the connected PTZ device.
“Baud rate” Enter the appropriate baud rate.
“Data bits” Enter the appropriate data bits.
“Stop bits” Enter the appropriate stop bits.
“Parity bit” Defines the parity.
Preset positions and setting up a patrol
Up to 20 preset positions can be saved in the video server. Proceed as follows:
1. Move the camera picture
into the desired position
using the direction keys
2. Give the current position a
preset name and click
“Add”. The name appears in
the preset locations list
Wiederholen Sie die
3. Repeat steps 1-2 to add
more preset locations
4. Highlight the preset
locations that you wish to
use for a patrol, and confirm
these with “Select”
5. Adjust the dwelling time for
each of the preset locations
if required.
6. Save your settings
To begin the patrol, press “PATROL” in the live picture of the video server. Press “STOP” to
stop this).
Custom command
The “Custom Command” menu item allows you to access individual functions of your PTZ device or PTZ
camera directly.
This function is usually used to call up saved preset locations or pre-defined patrols.