beautypg.com

Finishing the installation – ABUS FU8200 Secvest 2WAY Wireless Info Module User Manual

Page 40

background image

40


Partition 1 Partition 2 Partition 3 Partition 4


7.5. Finishing the installation

If no wireless location check has been made, then it is
important that the strength of the incoming signal is
checked

now (see “Testing the signal strength”).

When the signal strength is satisfactory:

1. Reattach the piezo signaller cable to the PCB.
2. Attach the front part of the housing to the rear

wall and fasten it with the screw (carry out the
steps in figure 1 in reverse order).