ABUS FUAA10021 Secvest IP Basic Set Quick operating instructions - Manual (Page 48)

46
Procedure RF
Radio components, operating units
and detectors
Note:
Before opening the housing of the Secvest IP or
housings of any wireless devices (e.g. for chang-
ing batteries) please ensure that the system is in
learn mode.
System → Maintenance → learn mode ON
Before you start, consider which detectors you want to learn in for which zones. The first three radio posi-
tions are reserved for operating units and cannot be used for detectors. Make sure that you only learn in
detectors with the same properties (intrusion, fire, panic, technology) in one zone.
!
1
• Operating controls
• Learning in
• Exit program menu
• Overview
Detectors Group 1
Detectors Group 1
Detectors Group 1
Detectors Group 1
Operating units 3
Operating units 2
Operating units 1 Detectors Group 3
Detectors Group 3
Detectors Group 3
Detectors Group 3
Detectors Group 2
Detectors Group 2
Detectors Group 2
Group 1 Group 2 Group 3 Group 4
Operating
units
Detectors Detectors Detectors
1/2/3 1/2/3/4 5/6/7 8/9/10/11
Channels
1-3 Channels
4-7 Channels
8-10 Channels
11-14