ABUS AZ4110 LCD Keypad for Terxon SX_MX Operating instructions - Manual (Page 36)

14
UK
9.6 Event memory
The alarm system stores the last 250 events. To read the
alarm memory:
Enter a valid user code.
The control unit shows:
Press:
5
The LCD display shows the latest events first.
You can page forwards and backwards in the event
memory. Press key 1 to page forwards and key 3 to page
backwards.
Press
to switch between the event and the date.
Press
to exit the event memory.
The event memory cannot be deleted by the programmer
or the user.
Entries in the event memory and their meaning:
Entry Meaning
Power fault Failure of 230V AC power supply
Power OK 230V AC power supply restored
Alarm
cancellation Alarm aborted manually by user
AUX DC fault 12V DC power supply failed or AUX
fuse defect
AUX DC fault
OK 12V DC power supply restored
Bad Checksum Error in alarm centre memory
Battery fault Failure of battery charger or battery
fuse defect
Battery fault OK Battery charger restored
Break-in zone
nn alarm Zone nn has triggered a burglar
alarm
Break-in Zone Zone nn OK
nn OK
Factory settings
loaded Factory settings restored
EEPROM fault Memory error in the alarm centre
Fire zone nn
alarm Zone nn has triggered a fire alarm
Fire zone nn
reset Zone nn reset
Fire zone nn re-
connected Zone nn re-connected
BDTnn code
lock A user has tried too often to enter
code in the control unit
BDTnn fault Control unit nn failed
BDTnn
connected Control unit nn reconnected
BDTnn Sabo Control unit has triggered a tamper
alarm
BDTnn Sabo OK Control unit nn tamper reset
BDTnn FE
Alarm Fire alarm triggered at control unit nn
BDTnn MN
Alarm Medical emergency alarm triggered
at control unit nn
SSL active ZN
nn Alarm centre activated via key switch
of zone nn
Entry Meaning
SSL de-active
ZN nn Alarm centre deactivated via key
switch of zone nn
SBox ZN nn
closed Zone nn with key box property closed
SBox ZN nn
open Zone nn with key box property
opened
Sabo central
alarm The lid contact of the alarm centre
was triggered
Sabo central
alarm OK The lid contact of the alarm centre is
closed again
Battery fault Fault in battery power supply
Battery fault OK Fault in battery power supply
remedied
BDTnn ÜF
Alarm BDT nn has triggered a panic alarm
Panic ZN nn
alarm Zone nn has triggered a panic alarm
Panic ZN nn
reset Panic alarm of zone nn reset
Aktiv fehlg. ZN
nn The alarm centre could not be
activated since ZN nn was triggered