ABUS AZ4110 LCD Keypad for Terxon SX_MX Operating instructions - Manual (Page 35)

13
UK
9.4 Touch-free proximity reader
(chip key)
Instead of entering a user code, a user can obtain
legitimation using a touch-free proximity reader (chip key).
Point the chip key at the control unit instead of entering a
user code. You can give both the master code and a chip
key to any user code. To add a chip key to the system:
Enter the user code 1 (B001 or the master code).
The control unit shows:
Press:
4
The control unit shows:
Enter the user code to which you want to add a chip key.
The control unit shows:
Confirm your input by pressing.
.
The control unit shows:
Hold the chip key in front of the control unit. The control
unit now loads the chip key function and confirms
successful learning with a double tone.
The control unit now displays the date and time. To add a
new chip key, repeat the above steps.
9.5 Deleting a chip key
A chip key can only be deleted together with the user
code. If you delete the user code, you simultaneously
delete the chip key.
Delete the chip key in the same way as you delete a user
code, and then enter this user code:
0 0 0 0.
Confirm your input by pressing.
.
The alarm centre confirms the deletion of the user code
and the chip key with a double tone.