ABUS AZ4110 LCD Keypad for Terxon SX_MX Operating instructions - Manual (Page 24)

UK UK
1 Introduction
Dear Customer,
thank you for purchasing the Burglar Alarm Panel
Terxon MX. You have purchased a product that has been
designed and constructed according to the state-of-the-
art,
which complies with the current standards of domestic
and European regulations. The CE has been proven and
all related certifications are available from the
manufacturer (www.abus-sc.eu) upon request.
To maintain this status and to guarantee safe operation, it
is your obligation to observe these operating instructions!
In the event of questions, please contact your local
specialist dealer.
ABUS Security-Center GmbH & Co. KG
86444 Affing
GERMANY
www.abus-sc.eu
[email protected]
2 Usage in accordance with
regulations
This burglar alarm panel uses detectors and transmitters
to secure your property. You can use it to protect your
company, house, garage, garden house, weekend
cottage, etc.
The alarm centre registers unauthorised break-ins by
switching output contacts to which you can connect visual,
acoustic or silent alarm transmitters.
The alarm centre contacts and connected components
must be kept free of moisture (bathrooms and similar
surroundings are to be strictly avoided).
Use of this product for other than the described purpose
may lead to damage of the product.
Other hazards such as short-circuiting, fire, electric shock,
etc., are also possible. The power unit is designed for
operation with mains electricity at 230 Volt AC / 50 Hz.
No part of the product may changed or modified in any
way.
Connection to the public power network is subject to
country-specific regulations. Please be aware of
applicable regulations in advance