Infinity Drain TD Series Installation Instructions - Manual (Page 6)

6
Subfloor
Stainless Steel
Channel Assembly
Final Mortar Bed
Clamp Down
Floor Drain
Pre-Pitched
Mortar Bed
Waterproofing
Membrane
Finishing Material
Backer Board
Thinset
Finished Grate
8. Using desired floor material, mark the
thickness of the material along the channel so
that it will finish 1/16” above the channel. Lay
final mortar bed across the wet area. Pitch
this bed in one plane toward the linear drain.
Ensure space for thinset and finishing mate-
rial to finish 1/16” above the channel. After
dry, apply a bead of silicone caulk around the
channel. Lay thinset and finishing material,
and have material finish to the edge of the
combined stainless steel channel. DO NOT
allow finishing material to finish passed the
stainless steel channel edge.
9. FXTIF 65/TD 50 INSTALL: Spread a layer
of mortar into the Tile Insert Frame (TA65),
allowing for thinset and finishing material to
finish 1/16” above the metal frame. Allow to
dry, spread thinset and lay material.
8. Utilizando el material de piso deseado, marque
el espesor del material a lo largo del canal para
que termine 1/16” arriba del canal. Sentar la últi-
ma capa de mortero a través de la zona mojada.
Lanzar esta capa en un plano hacia el drenaje
lineal. Asegura que el espacio para el thinset
y el material terminen 1/16” arriba del canal.
Una vez este seco, aplique un cordón de silicona
alrededor del canal. Colocar el thinset y material
terminado, y tener el material terminado al borde
del canal de acero inoxidable. NO DEJE o PERMI-
TA que el material terminado termine en la parte
superior del canal de acero inoxidable.
9. FXTIF 65/TD 50 INSTALACION: Extender
una capa de mortero en la inserción en la
parte (TA65), permitiendo el thinset y el mate-
rial terminado a 1/16” arriba de la estructura
de metal. Permitir que se seque, difundir el
thinset y tender el material.
Caulking
Mortar Bed
Mortar Bed
Sub-floor
Waterproofing
Membrane
Finishing Material
Assure that grate is lower
than installed tile
Mortar
Bed
Mortar Bed
Sub-floor
Waterproofing
Membrane
Before finishing
material
Antes que el material
esté terminado
After finishing
material
Después que el material
esté terminado