Infinity Drain FXTIF 6520 Series Submittal Sheet User Manual
Fxtif 65 series, Fxtif│fixed length, Installation (fx) fixed
FXTIF 65 Series
FXTIF│Fixed Length
-
12 gauge 316 Stainless Steel grate and channel
-
Pre-pitched channel with “Fixed” lengths and “Fixed” center outlet
-
Not site sizeable
-
Indoor or outdoor use
-
Works with 2″ clamp down floor drain with 2″ throat (strainer size)
(not included)
-
Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
-
Grate can be removed completely for cleaning
-
Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Finishes:
_____
Satin Stainless
_____
Polished Stainless
_____
Matte White
_____
Matte Black
2” clamp down drain not
included in kit
Complete Kits:
FXTIF 6520 20″ Complete Kit
FXTIF 6540 40″ Complete Kit
FXTIF 6548 48″ Complete Kit
FXTIF 6560 60″ Complete Kit
Components:
TA 6520 20″ Stainless Steel Grate
TA 6540 40″ Stainless Steel Grate
TA 6548 48″ Stainless Steel Grate
TA 6560 60″ Stainless Steel Grate
IC 6520 20″ Stainless Steel Fixed Channel
IC 6540 40″ Stainless Steel Fixed Channel
IC 6548 48″ Stainless Steel Fixed Channel
IC 6560 60″ Stainless Steel Fixed Channel
TNAS
Stainless Steel Threaded Nipple
TKEY
Lift Out Key
Add Clamp Down Drain:
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
Optional Components:
TNRN
Stainless Steel Threaded Nipple
(
3” extension)
UCP 2
Universal 2” Clamping Plate
UCP 4
Universal 4” Clamping Plate
ERB
Eccentric Reducer Bushing 4”x2”
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Installation (FX) Fixed