Infinity Drain FXMN 6532 Series Submittal Sheet - Manual

FXMN 65 Series
FXMN 65│Fixed Length
- 14 gauge 304 Stainless Steel grate and channel
- Pre-pitched channel with “Fixed” lengths and “Fixed” center outlet
- Not site sizeable
- Indoor or outdoor use
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
(not included)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Finishes:
_____
Satin Stainless
_____ Polished Stainless
_____
Lifetime Oil
Rubbed Bronze
_____
Matte White
_____
Matte Black
2” clamp down drain not
included in kit
Complete Kits:
FXMN 6532 32″ Complete Kit
FXMN 6536 36″ Complete Kit
FXMN 6542 42″ Complete Kit
FXMN 6548 48″ Complete Kit
FXMN 6560 60″ Complete Kit
Components:
MA 6532 32″ Stainless Steel Grate
MA 6536 36″ Stainless Steel Grate
MA 6542 42″ Stainless Steel Grate
MA 6548 48″ Stainless Steel Grate
MA 6560 60″ Stainless Steel Grate
XC 6532 32″ Stainless Steel Fixed Channel
XC 6536 36″ Stainless Steel Fixed Channel
XC 6542 42″ Stainless Steel Fixed Channel
XC 6548 48″ Stainless Steel Fixed Channel
XC 6560 60″ Stainless Steel Fixed Channel
TNAS
Stainless Steel Threaded Nipple
Add Clamp Down Drain:
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
Optional Components:
TNRN Stainless Steel Threaded Nipple
( 3” extension)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4”x2”
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Installation (FX) Fixed