Infinity Drain FFMN 2548 Series Submittal Sheet PDF - Manual

FFMN 25 Series
FFMN 25│Fixed Length
- 14 gauge 304 Stainless Steel grate
- 16 gauge 304 Stainless Steel channel
- Pre-pitched channel with “Fixed” lengths and “Fixed” center vertical
(down) outlet location
- Not site sizeable
- Indoor or outdoor use
- Bonded “Flange” installation for flush against the wall.
- Lowest height for curbless installations
- Uses Liquid and Fabric Sheet Membrane waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Complete Kits:
FFMN 2532 32″ Complete Kit
FFMN 2536 36″ Complete Kit
FFMN 2542 42″ Complete Kit
FFMN 2548 48″ Complete Kit
FFMN 2560 60″ Complete Kit
Components:
MA 2532 32″ Stainless Steel Grate
MA 2536 36″ Stainless Steel Grate
MA 2542 42″ Stainless Steel Grate
MA 2548 48″ Stainless Steel Grate
MA 2560 60″ Stainless Steel Grate
FC 6532 32″ Stainless Steel Fixed Channel
FC 6536 36″ Stainless Steel Fixed Channel
FC 6542 42″ Stainless Steel Fixed Channel
FC 6548 48″ Stainless Steel Fixed Channel
FC 6560 60″ Stainless Steel Fixed Channel
CI 2532 32″ Channel Insert
CI 2536 36″ Channel Insert
CI 2542 42″ Channel Insert
CI 2548 48″ Channel Insert
CI 2560 60″ Channel Insert
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
_____
Satin Stainless
_____
Polished Stainless
_____
Lifetime Oil
Rubbed Bronze
_____ Matte White
_____
Matte Black
Installation (FF) Fixed Flange
REV. 10.02.2013