Infinity Drain TD Series Installation Instructions - Manual (Page 3)

3
FXED65/FXDG65/FXMN65/FXAS65/FXTIF65
kits: DO NOT include the mechanically fasten-
ing clamp down drain due to the variance of
material by local code. This a residential drain
that is available through Infinity Drain or your
local plumbing supply from various manu-
facturers (i.e. Oatey®, Sioux Chief™, JSC™,
PROFLO™, Matco-Norca™).
TD50 kits are provided with a choice of a Cast
Iron, ABS or PVC mechanically fastening clamp
down drain body. (CDI 22/CDP 22/CDA 22).
FXAS125 kits are provided with a (CDI43W)
Cast Iron mechanically fastening clamp down
drain body. This item can be substituted for an
ABS or PVC drain body (CDA 42/CDP 42/CDA
43/CDP 43).
FXED65/FXDG65/FXMN65/FXAS65/FXTIF65
Equipos: NO INCLUYE la sujeción mecánica
del drenaje por la razón que varía el material
de código local. Este drenaje es residencial
que está disponible a través de Infinity Drain
o su local suministro de plomería de diversos
fabricantes. (i.e. Oatey®, Sioux Chief™, JSC™,
PROFLO™, Matco-Norca™).
TD50 equipos son proveído con una elección
de drenaje en hierro fundido, ABS en plástico,
o PVC. (CDI 22/CDP22/CDA 22).
FXAS125 equipos are provided with a (CDI43W)
Cast Iron mechanically fastening clamp down drain
body. This item can be substituted for an ABS or
PVC drain body (CDA 42/CDP 42/CDA 43/CDP 43).
2” clamp down drain
not included in kit
Optional Components: (Not Included)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
TNRN Stainless Steel Threaded Nipple (Extends drain height 3”)
ERB Eccentric Reducer Bushing 4”x2”
Available Clamp Down Drains: For FXAS 125 ONLY:
CDI 22 Clamp Down Drain Cast Iron CDA 42 Clamp Down Drain, ABS, 4” Throat, 2’ No Hub Outlet
CDP 22 Clamp Down Drain PVC
CDP 42 Clamp Down Drain, PVC, 4” Throat, 2” No Hub Outlet
CDA 22 Clamp Down Drain ABS CDI 42 Clamp Down Drain, Cast Iron, 4” Throat, 2” No Hub Outlet
CDA 43 Clamp Down Drain, ABS, 4” Throat, 3” No Hub Outlet
CDP 43 Clamp Down Drain, PVC, 4” Throat, 3” No Hub Outlet
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes are
the responsibility of the installer.
Tenga en cuenta: Instalador debe compro-
bar todas las dimensiones en las partes pre-
via a la instalación y consultar localmente y
nacionalmente los códigos. La conformidad
y el cumplimiento de códigos local y nacion-
al es responsabilidad del instalador.
Section A-A
FXED 65, FXDG 65,
FXMN 65, FXAS 65
Section A-A
FXAS 125
Section A-A
FXTIF 65/TD 50
2⅞"
1³⁄¹⁶"
1"
2½"
6½"
2"
1⅝"
2⅞"
2"
1¹¹⁄¹⁶"
2½"
6½"
2"
¾"
1⁷⁄¹⁶"
1"
4¹⁄¹⁶"
8"
3"
5⅛"