Extron Electronics MLM 206 7GWP - Manual

1 MediaLink ™ Mounting Options • Installation Guide
MediaLink ™ Mounting Options Installation Guide
This guide details how to install the following Extron MediaLink TM Mounting
Options faceplates, designed for use with an MLC 206 controller.
• MLM 206 LAAP , a 3.15" H x 10.00" W (8.0 cm H x 25.4 cm W) lectern/
furniture-mounting faceplate with four single-space AAP openings:
#60-389-02 (black), #60-389-03 (white), 60-389-05 (RAL9010 off-white)
MLM 206 LAAP
Extron
VOLUME
MAX
MIN
MediaLink
DISPLAY
POWER
This faceplate replaces the MLM-LAAP.
• MLM 206 7GWP , a seven-gang (4.50" H x 13.57" W [11.43 cm H x
34.46 cm W]) faceplate with eight single-space AAP openings. This plate can
be mounted to a mud ring, an Extron Surface Mount Box (#60-645-02 or -05),
an Extron External Wall Box (#60-689-02, -03, -05), or a standard electrical
box: #70-373-02 (black), #70-373-03 (white), #70-373-05 (RAL9010 off-white)
Extron
DISPLAY
POWER
VOLUME
MAX
MIN
MediaLink
MLM 206 7GWP
Controllers and AAPs are not included with any of the faceplates.
Replacing the MLC 206 Faceplate with an MLM Faceplate
1. Use a small Phillips screwdriver to remove the four faceplate attachment
screws marked
1
in the picture below, and save them for later use.
Extron
DISPLAY
POWER
VOLUME
MAX
MIN
VCR DVD Laptop
MLC 206
1
1
1
1
Do not remove these screws while the MLC 206 is installed in a wall or
furniture, or the controller may fall down into the wall/furniture or wall box.
68-621-01 Rev. F
01 05