beautypg.com

Installation, cont’d – Extron Electronics ISS 506 IO_board Installation User Manual

Page 13

background image

Installation, cont’d

ISS 506 Optional I/O board • Installation

0

N

The HD-SDI and low resolution (scan converter) output boards use connectors J2A/J2B and J1. The DVI output

board uses J2A/J2B only.

4

.

Align one or both connector extension(s) with J1 and J2A/J2B on the main board (

e

). Gently apply

pressure to carefully mate the extension(s) with the main board (figure 8).

N To make installation of the board easier, angle the extensions slightly away from the rear of the ISS as shown.

5

5

Figure 8 — Connector extensions