Extron Electronics MCP 1000 - Manual (Page 19)

MCP 1000 • Specifi cations, Part Numbers, and Accessories
Specifi cations, Part Numbers, and Accessories
MCP 1000 • Specifi cations, Part Numbers, and Accessories A-2 A-3
Specifi cations
Control/remote — control panel
Serial control ports ....................... 1 host 9-pin female D connector
1 switcher 9-pin male D connector
Baud rate and protocol ............... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin confi gurations . 2 = TX, 3 = RX, 5 = GND
Extron remote key pad control ... (2) 5 mm, 5-pole captive screw connectors
Program control ............................. Extron’s Simple Instruction Set (SIS
™ )
General
Power
MCP 1000M ........................ 100 VAC to 240 VAC, 50/60 Hz, 15 watts,
internal, autoswitchable
MCP 1000S ......................... Supplied by the MCP 1000M or the matrix
switcher
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Rack mount .................................... Yes, with included brackets. Also under-
furniture mountable or shelf-mountable
with included brackets.
Enclosure type .............................. Metal
Enclosure dimensions .................. 1.75" H x 17.5" W x 5.0" D
(1U high, full rack wide)
4.4 cm H x 44.5 cm W x 12.7 cm D
(Depth excludes connectors and knobs.
Width excludes rack ears.)
Product weight
MCP 1000M ........................ 3.0 lbs (1.4 kg)
MCP 1000S ......................... 2.5 lbs (1.1 kg)
Shipping weight
MCP 1000M ........................ 7 lbs (4 kg)
MCP 1000S ......................... 6 lbs (3 kg)
Vibration ........................................ ISTA 1A in carton (International Safe
Transit Association)
Listings............................................ UL, CUL
Certifi cations .................................. CE, FCC Class A
MTBF ............................................... 30,000 hours
Warranty ........................................ 3 years parts and labor
All nominal levels are at ±10%.
Specifi cations are subject to change without notice.
Included Parts
These items are included in each order for an MCP 1000:
Included parts Part numbers
MCP 1000M (master unit) 60-298-01
MCP 1000S (slave unit) 60-298-02
Red button caps (8) 70-111-01
Green button caps (8) 70-111-02
Yellow button caps (8) 70-111-03
Blue button caps (8) 70-111-04
Assorted button caps (8) 70-111-05
MBD 149 rack mounting kit 70-077-03
5-pole, 5 mm captive screw connector 10-163-13
MCP 1000 User’s Manual
Button Label Generator program 29-044-01
Cables
Plenum comm-link cable Part number
Cut lengths:
CTLP plenum 50' (15.2 m) long 26-461-01
CTLP plenum 100' (30.4 m) long 26-461-02
CTLP plenum 200' (61 m) long 26-461-03
CTLP plenum 400' (122 m) long 26-461-04
Bulk spools:
500' (152.4 m) 22-119-02
1000' (304.8 m) 22-119-03