Extron Electronics IPL M PDP-ES User Guide - Manual (Page 32)

IPL M PDP-ES • Specifications, Part Numbers, Accessories IPL M PDP-ES • Specifications, Part Numbers, Accessories
Specifications, Part Numbers, and Accessories
Parts
Included parts
Included parts Replacement part number
IPL M PDP-ES 60-725-01
IPL M PDP-ES User’s Manual 68-1021-01
IPL M PDP-ES Quick Start Card 68-1021-10
Connector Label (Apply to Pioneer display) 33-1154-01
Tweeker
A-3
Compliances ................................. CE, FCC part 15 B class B, VCCI class B,
AS/NZS, ICES, IFCC Class A, IEC60950,
IEC60056, EN550ee class B, EN55024,
EN61000-3-2,-3-3
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
A-2
Specifications
Ethernet control interface
Connectors .................................... 1 RJ-45 male connector
Data rate ........................................ 10/100 Base-T, half/full duplex with
autodetect
Protocols ....................................... ARP, DHCP, ICMP (ping), TCP/IP, UDP/
IP, Telnet, HTTP, SMTP
Default settings ............................ Link speed and duplex level =
autodetected,
IP address = 192.168.254.254,
subnet mask = 255.255.0.0,
default gateway = 0.0.0.0,
DHCP = off
Serial control interface
Port number/type ....................... 1 RS-232
Connectors .................................... (1) 9-pin female D
Baud rate and protocol ............... 1200, 2400, 4800, 9600 (default), 19200,
38400 baud (adjustable); 8 data bits, 1 stop
bit, no parity
Pin configurations (RS-232) ........ 2 = RX, 3 = TX, 5 = GND
General
Power ............................................. Supplied by a Pioneer plasma display
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, noncondensing
Rack mount ................................... No
Enclosure type .............................. Metal faceplate
Product dimensions
Faceplate ................... 1.09" H x 4.80" W x 0.26" D (2.6 cm H x
12.2 cm W x 0.7 cm D)
Device ........................ 0.9" H x 3.6" W x 3.5" D (2.3 cm H x 9.2 cm
W x 8.8 cm D)
(Depth excludes connectors.)
Product weight………………… 0.2 lbs (0.11kg)
Shipping weight……………….. 1 lb (1 kg)
Vibration ....................................... ISTA 1A in carton (International Safe
Transit Association)
Listings .......................................... UL1950/UL6500, CUL