Extron Electronics IPL M PDP-ES User Guide - Manual (Page 26)

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control
Communication and Control
command contains invalid parameters, it returns an error
response to the host.
E12 — Invalid port number
E13 — Invalid parameter
E14 — Not valid for this configuration
E17 — System timed out
E22 — Busy
E24 — Privilege violation
E25 — Device not present
E26 — Maximum number of connections exceeded
E27 — Invalid Event number
E28 — Bad Filename/File not found
References to errors (at command descriptions on the
following pages)
14 = Commands that give E14 (Invalid Command for this
configuration) if sent to Extron product whose current
configuration does not support the command.
24 = Commands that give E24 (Privilege violation) if not
administrator level
27 = Commands that may give E27 (Invalid Event number)
28 = Commands that may give E28 (File not found)
4-22
Command/Response T
able for Simple Instruction Set (SIS) commands
Command
ASCII (
Telnet)
URL Encoded (Web)
Response
Bidirectional Serial Data port
Send data string Esc 1*300*100*3D RS
X2
W1%2A300%2A100%2A3DRS|
X2
r
esponse from command
Configur
e parameters
24
Esc 1*
X25
,N,8,1CP
W1%2A
X25
%2CN%2C8%2C1CP|
Cpn1•Ccp
X25
,N,8,1
V
iew parameters Esc 1CP
W1CP|
X25
,N,8,1
Set r
eceive timeout
24
Esc 1*400*200*0
*3DCE
W1%2A400%2A 200%
2A
0
%2A3DCE| Cpn1•Cce400,
200,
0,3
D
V
iew r
eceive timeout Esc 1CE
W1CE|
00400,
00200,
0
, 00003D
Set r
edirect mode
24
Esc 2*1*500*3DCD
W2%2A1%2A
500%2A3DCP|
Cpn 2•Ccd 1,
00500,00003D
T
erminated r
edirect mode
24
Esc 1*0CD
W1%2A0CD|
Cpn 1• Ccd 00000,00000,00000L
V
iew r
edirect mode Esc 1CD
W1CD|
00002
,00500,
00003D
Firmware
V
ersion/Part
Number/Information
Query
firmwar
e
version
Q
Q
X11
Query
verbose
version
information
0Q
0Q
sum of responses fr
om 2Q-3Q-4Q
Query
firmwar
e
version
1Q
1Q
X11
Query
bootstrap
version
2Q
2Q
X11
Query
factory
firmwar
e
version
3
Q
3Q
X11
(plus web ver
.-desc-UL
date/time)
Query updated firmwar
e
version
4Q
4Q
X11
(plus web ver
.-desc-UL
date/time)
(
Note:
An asterisk (*) placed after the version number indicates which version is curr
ently running. Question marks (?.??) indicat
e
that only the factory firmwar
e version is loaded. A
car
et (^) after the version number indicates the firmwar
e versi
on that should be
running, but a Mode 1 reset was executed The default factory firmware version is loaded. An exclamation point (!) a
fter the version
number indicates corrupted firmware.)
Request part number
N
N
60-725-01
Request model name
1I
1I
IPL M PDP-ES
Request model description
2I
2I
Pioneer PDP Expansion Solution Interface
Car
d
Request system memory usage
3I
3I
# Bytes used out of 1024 Kbytes
Request user memory usage
4I
4I
# Bytes used out of 704 Kbytes
4-23