Extron Electronics MTP 15HD A Series User Guide Rev. F - Manual (Page 20)

Reference
Information
This section provides information about:
z z Specifications
z z
Part Numbers, Optional Accessories, Cables, and Connectors
Specifications
Video
Gain ............................................. Unity
Number/signal type ....................... 1 set of proprietary analog signals
Connectors ................................... 1 female RJ-45
Video input and loop through — transmitters
Number/signal type ....................... 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite
video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
Connectors ................................... 2 female 15-pin HD
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ............ 0.3 V to 1.45 Vp-p
Impedance .................................... 75 ohms
Horizontal frequency ..................... 15 kHz to 130 kHz
Vertical frequency ......................... 30 Hz to 150 Hz
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ............ 250 mV
Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ)
Number/signal type ....................... 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite
video
Connectors ................................... 1 female RJ-45
1 female 15-pin HD
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ............ 0.3 V to 1.45 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ...................................... <±35 mV with input at 0 offset
Skew compensation ...................... 62 ns
MTP 15HD A Series • Reference Information 16