Extron Electronics MTP 15HD A Series User Guide Rev. F - Manual (Page 10)

Front Panel Features
See figure 2 below to identify the front panel features on the transmitter and receiver.
MTP RL 15HD A receiver
MTP T 15HD A transmitter
RGB
PEAKING LEVEL
MTP RL 15HD A SEQ receiver
RGB
DELAY
PEAKING LEVEL RED
GREEN
BLUE
SELECT
MTP SERIES
MTP SERIES
MTP SERIES
1
2 3
1
1
2 3 4 5 6
Figure 2. MTP Front Panels
a
Power LED — The LED indicator lights when the unit is receiving power.
b
Level control — The Level control alters the video output voltage to affect the
brightness of the displayed image. Adjust the knob while viewing the displayed image to
set the level that provides the best picture quality.
NOTE: For best results when using an RL receiver, connect a load to the buffered
output on the receiver before adjusting the level.
c
Peaking control — Peaking affects the sharpness of a picture. Increased peaking
can compensate for mid and high frequency detail loss from low bandwidth
system components or capacitance in long cables. The minimum setting (at the
counterclockwise limit) provides no peaking. The maximum setting (at the clockwise
limit) provides 100% peaking. Adjust this control to obtain the optimum picture
sharpness.
MTP 15HD A Series • Installation and Operation 6