Extron Electronics MTP 15HD RS Series User Guide Rev. F - Manual (Page 25)

Rack Mounting Procedure
These units can be mounted on any of these optional rack systems, including:
z z RSF 123: 3.5 inch deep, 1U rack shelf kit (part number 60-190-20)
z z RSB 123: 3.5 inch deep, 1U basic rack shelf (part number 60-604-21)
z z
RSU 126: 6 inch deep, 1U rack shelf kit (part number 60-190-10)
z z RSB 126: 6 inch deep, 1U basic rack shelf (part number 60-604-11)
z z RSU 129: 9.5 inch deep, 1U rack shelf kit (part number 60-190-01)
z z RSB 129: 9.5 inch deep, 1U basic rack shelf (part number 60-604-02)
To mount the unit on a rack shelf, follow the instructions provided with the shelf accessories.
Back of the Rack Mounting Procedure
The MTP can be mounted to the rear of a rack using the Extron MBB 100 1/8 and 1/4 back
of rack mounting kit (part number 70-367-01). The kit allows the product to be vertically
mounted to the front or rear rack supports and facing either towards the front or the rear of
the rack.
To mount the unit, follow the instructions provided with the MBB 100 kit.
Projector Mounting
Mount the unit onto a projector using the optional Extron PMK 100 1/4 rack width pole
mount kit (part number 70-217-01). To mount the unit, follow the instructions provided with
the PMK 100 kit.
MTP 15HD RS Series • Mounting 21