Extron Electronics HDMI DA6 User Guide - Manual (Page 13)

connecting to the USB Port
Use the mini Type B USB port on the front panel to connect the distribution amplifier to a host
computer to update firmware or to configure the unit with SIS commands.
1. Connect a USB A to mini B cable between the front panel USB Config port and a USB
port of the PC.
USB Cable
Type A
USB
Mini Type B
USB USB 1
USB
Ports
Computer HDMI DA6
HDMI DA6
HDMI DISTRIBUTION AMPLIFIER
CONFIG HDCP
1 2 3 4
SIGNAL
INPUT OUTPUTS
EDID 5 6
Figure 4. Connecting a PC to the HDMI DA6 Front Panel USB Port
2. If this is the first time a HDMI DA4 or HDMI DA6 is connected to the PC, the Found
New Hardware Wizard opens. Connect to Windows Update to search the web for the
driver needed for the USB port to communicate with the distribution amplifier. This is not
necessary if the USB driver is already on your PC.
Figure 5. Found New Hardware Wizard Welcome Screen
z
Select Yes, this time only to connect the PC to Windows Update only this time.
z
Select Yes, now, and every time I connect a device to automatically
connect to Windows Update every time the HDMI DA4 or HDMI DA6 connects to this
USB port.
z
Select No, not this time if you do not want to connect to Windows Update (for
example, if the driver is already on the PC).
HDMI DA4 and HDMI DA6 • Installation 7